These brackets replace “Top-Back Right.stl” and “Top-Back Left.stl” of Bambu Lab P1P Lite Enclosure by Crafty Sven

(https://makerworld.com/en/models/57978?from=search#profileId-59684)

The design pushes back the upper portion of the top back brackets so that the AMS Riser V2 by maCyo42 is able to sit on top of a P1P.

https://makerworld.com/en/models/133452?from=search#profileId-155321

The only change from the original is that I slid the upper slot back 1cm so that the riser would have enough room to fit properly.

I combined these brackets with “Top-Front Right.stl”, “Top-Front Left.stl”, “Side-Top Right.stl”, and “Side-Top Left.stl” from the original model with six M3x6mm screws to create a solid mount for the AMS Riser. All other parts of the enclosure are optional. For build instructions, see the documentation section of https://makerworld.com/en/models/57978?from=search#profileId-59684

I also ended up using a M3 tap. Since my P1P didn't have threads in those holes, I needed to make them myself.