EV Charging Card/Credit Card Slider/Holder/Wallet by hamsta

hamsta

Tools>Other Tools

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

Designer

45 min

1 plate

4.8(9)

Open in Bambu Studio

Boost

117

Released

Description

I have designed a user-friendly holder for EV charging cards, accommodating up to five cards. Two flexible notches, one on each side, securely hold the cards in place. You can easily push the cards out using your fingers when needed.

The model comprises two parts, allowing for easy printing without any support. After printing, simply push the two parts together carefully. No glue is required for assembly!

Boost Me (for free)

Do you like the model? Leave a Boost! Your contribution is highly welcome!

Comment & Rating (21)

@3DPete

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

Great print. Mine had some minor bed adhesion issues (but I can still use it) - if that's a problem for people it would be good if that could be tweaked.

The designer has replied

@hamsta

Thx for your rating! Which plate did you use? As the big flat sides are placed on the plate I am still wondering, what could have caused the adhesion issues.

@3DPete

Replying to @hamsta :

It's a textured PEI plate - it's usually very good, but I think thin, flat builds suffer from shrinkage sometimes - not much 3D structure above them to keep them in place. Maybe.

@hamsta

Replying to @3DPete :

Interesting. I am using the textured one a lot myself. Thx for the information!

@aurelderem

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

Au top !! juste faire attention en emboîtant.

The designer has replied

@hamsta

Thx!

@user_326263453

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

The designer has replied

@hamsta

Thanks for your stars! 🙏

@user_859760970

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

Not very sturdy, some small parts already broke when I tried to put everything together. Have a look at my small card holder /wallet. But it would be at least very easy to print.

The designer has replied

@hamsta

Thanks for your note. So, what would you suggest? Making the walls thicker to generate more place for the pins?

@user_859760970

Replying to @hamsta :

I would try to make the pins and slots wider.

@user_2143385688

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

Printed with no issues on X1C using SUNLU Gray PLA. Very usefull print! Thanks!

The designer has replied

@hamsta

Thanks a lot! Great to hear!

@user_326263453

Boosted

Great model!

The designer has replied

@hamsta

Thanks a lot! Hope you like it. And, thanks for the boost!

@stevecary

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

Nice. Thanks!

The designer has replied

@hamsta

You are welcome! Thank you for your rating!

@Rajmond95

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

The designer has replied

@hamsta

Thx for your rating!

@user_3638164183

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

@codepixel

Print Profile

0.2mm layer, 2 walls, 15% infill, no support, no glue needed

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (21)

License

Related Models

credit card wallet

Charging Station

Compact Wallet

Samsung Galaxy Watch 5/6/7 Charging Stand