SUNLU 250g Bambu Lab AMS Spool Adapter by DesignCraft

DesignCraft

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.8(16)

Open in Bambu Studio

Boost

132

104

Released

Description

This adapter system attaches to the edges of a SUNLU 250g 118x42mm spool enabling usage within a Bambu Lab AMS.

Features:

Reusable
SUNLU nameplate for easy identification when reusing

Instructions:

Measure your spool first to ensure it matches the specified dimensions
Print this model twice for a single spool
Affix one spool adapter to each side of the SUNLU spool
See attached photos

Considerations:

Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.

Attribution:

Testing of the model and photos provided by MindblownMaker 🤝

Comment & Rating (21)

@MindblownMaker

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfection!!! I just got the new model printed off, and now have my full set of 8, so I can run a full 4 color print with my AMS!!! Not only is it a perfect fit, it’s also one of the lowest gram count adapters for small rolls. Yours are often the lightest, while also not scrimping on quality and strength. Thanks for getting this set up for me, and also for the attribution in the model info. “Teamwork makes the dream work” 🤜🤛

The designer has replied

@DesignCraft

Thank you for the suggestion and helping to get this model posted!

@MindblownMaker

Boosted

Replying to @DesignCraft :

I now have all 4 sets printed out and loaded up! If you want to utilize this pic also, you are more than welcome to. Hope that this one gets some great extra traffic for you!😊🙏 Already at 7 prints of it, just 1 day in!!! I’m thinking that this one will be pretty good! 🥰

@user_2291495847

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed perfectly!

@l1nk

Print Profile

0.2mm layer, 2 walls, 15% infill

It printed perfect without any tolerance adjustment

(Edited)

@SubHoly

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

was looking all over and decided for your solution as it was the quickest and easiest. Printing: tried first print but it started to string... made custom profile for bambulab PETG and reprinted. the results are just speechless... now I just have to try to print it with AMS and then I will report back if it went ok 😁

@user_1051102413

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you for this print! I have 10 of those mini Sunlu filament spools and I thought I was out if luck. Not only did these print fast but they used less than half the filament of other solutions!

(Edited)

@user_3243014134

works perfectly, fits like a charm. great work!

@user_1574447078

Print Profile

0.2mm layer, 2 walls, 15% infill

did not hold reel tight when placed in the ams the reel would spin but but the sunlu reel that was placed in it would not. checked it with two different sunlu spools and the same thing happened

The designer has replied

@DesignCraft

Thank you for the feedback. There may be some variance on the manufacturing side. A quick solution I've used on other adapters (so you don't need to waste the print) is to use a couple pieces of tape (from the wall of the spool to the wall of the adapter) to prevent the adapter from spinning around the spool. I hope this helps!

@brighenne

Print Profile

0.2mm layer, 2 walls, 15% infill

works great

@user_411266389

Print Profile

0.2mm layer, 2 walls, 15% infill

These are a great idea. I printed 2 sets and they do work. Howver after removing the spools and replacing them, the second spools spin inside theee. I used some electrical tape and that stops the spin but certainly hurts the look. I’d like to see these without the letters and just a simple wagon wheel for faster printing. Still, they work. Perhaps a very rough finish where the spool meets the holder would help.

@user_2974731981

Print Profile

0.2mm layer, 2 walls, 15% infill

great pront

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Sunlu Spool Adapter for Bambu Refills AMS Lite

Print Profile(1)

Description

Comment & Rating (21)

License

Related Models

Sunlu Spool Adapter for Bambu Refills AMS Lite

Sunlu Spool Adapter for AMS Lite

New Sunlu Spool Adapter for BambuLab Refill

Sunlu new reusable spool adaptor press fit