If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

https://paypal.me/muddymaker

UPDATE Jan 30th: Utility Case Carry Rack System for this case and the Utility Case Low Boy Case can be found here: https://www.printables.com/model/719640-utility-case-carry-rack-system

Utility case double decker. The same as my utility case only in this one you can fit up to 4 trays and because it's bigger I've added a handle for easier transportation. You will need an additional 2 M3x10mm fasteners for the handle.

The lid insert can be affixed to the inside of the lid with double sided tape if you want to keep your case versatile and modular, or you can superglue it in place for a more permanent addition.

The trays are interchangeable, meaning they can be placed anywhere in the case. Mix and match to suit your needs.

You'll need 6 M3X25mm fasteners, they all screw into the plastic.

Print the clips with PETG@100% infill.

If you print the optional TPU seal, print with 1 to 2 perimeters/walls and 0% infill, the seal needs to be squishy otherwise you will have trouble closing the lid.

No supports are needed.

Happy printing.