A model of my interpretation of dinosaur's bones system - but it's a simple jigsaw :)

What you basically need for this to work is the bones part and the sand - in which you will be inserting the bones. The box is optional, I created it because I didn't want to lose any bones somehow.

I arranged the bones part on the plate upside-down - in that way, you are getting the plate texture instead of the top surface print on the top of the bones. They are reversible though, so if you want - you can put this model back to its original position.

Please note that some bone parts are pretty small so this project may not be a good toy for little children.

Filaments I used and came out well:

• Bambu PLA Basic (used for bones) - worked like magic <3
• Polyterra PLA (used for sand) - needed a little more work to look good
• Rosa 3D (used for box) - worked just fine

I also tried to print a test model of sand in Bambu PLA Basic and I must admit that it worked better than this Charcoal Black Polyterra you can see in the photo.

Test print available - one of print profiles is a small fragment of the sand plate which I found the most difficult to manage. If you are not sure if your filament will be compatible with this print - please print this test fragment first.

Printer I tested on: Bambu Lab P1S

Hotend: 0.4mm Stainless Steel

Print time: ~3,5h

Additional tools: not needed

Also if you have any advice on what I can do to make my future projects better, please let me know :)