BambuLab AMS Silica Gel Box With Mi/Xiaomi Hygrometer - Full Set

Remixed by

BambuLab AMS Silica Gel Box With Mi/Xiaomi Hygrometer - Full Set

Remixed by
Boost
413
1030
333

Print Profile(7)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

5 Pieces - 0.2mm layer, 2 walls, 15% infill
5 Pieces - 0.2mm layer, 2 walls, 15% infill
Designer
7.7 h
3 plates
4.7(179)

3 Pieces - 0.2mm layer, 2 walls, 15% infill
3 Pieces - 0.2mm layer, 2 walls, 15% infill
Designer
5.7 h
2 plates
4.6(65)

5 Pieces - Fine Details - 0.12mm layer, 2 walls, 15% infill
5 Pieces - Fine Details - 0.12mm layer, 2 walls, 15% infill
Designer
11.3 h
3 plates
4.4(8)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
7.7 h
1 plate
4.8(25)
Click to see more

Open in Bambu Studio
Boost
413
1030
333
121
3.5 k
2 k
Released

Description

BambuLab AMS Silica Gel Box With Mi/Xiaomi Hygrometer - Full Set of 5 boxes

The project comes pre-oriented on the build plate. No supports are required when printing the pieces.

 

The hygrometer/thermometer just clicks in place. You can connect it to bluetooth and use it with Xiaomi Home app.

If you want an accurate reading do not fill with silica the central one with the sensor.

 

 

---------------------------

It's available a variant of this model that use a different hygrometer sensor.

You can find it here:

BambuLab AMS Silica Gel Box With Hygrometer - Full Set


----------------------

Hardware:

 

The plates are divided by box type:

  • 01 - One large central box with humidity sensor/thermometer
  • 02 - Two large boxes
  • 03 - Two small boxes for the sides (optional)

Assembly Istruction

  • Insert the side panels into the central box by sliding them into the grooves
  • slide the cover on the panel tracks until it bottoms out

 

 

 

 

 

---

N.B. Do not remove the Object Modifiers from the plate 03

 

Comment & Rating (333)

Please fill in your opinion
(0/5000)

Print Profile
5 Pieces - 0.2mm layer, 2 walls, 15% infill
They print great but the locking mechanism needs to be better. Ive had one open when pulling it out. You can imagine the mess lol
1
Reply
Print Profile
5 Pieces - 0.2mm layer, 2 walls, 15% infill
Hat alles super gepasst. beim zusammenbauen vorsichtig sein, sonst kann man schnell etwas abbrechen.
0
Reply
Boosted
Could you please tell me the model number of the Xiaomi temperature and humidity sensor?
Show original
0
Reply
hat gut geklappt
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
All fine, printed with PETG
0
Reply
Print Profile
5 Pieces - 0.2mm layer, 2 walls, 15% infill
printed good,just very difficult to assemble because very tight. the 2 narrow containers at the sides are also difficult to squeeze into the ams
0
Reply
Print Profile
5 Pieces - 0.2mm layer, 2 walls, 15% infill
Xiaomi hydrometer is now arrived. the print quality is excellent. thank you !
0
Reply
Print Profile
3 Pieces - 0.2mm layer, 2 walls, 15% infill
super
0
Reply
Boosted
Print Profile
3 Pieces - 0.2mm layer, 2 walls, 15% infill
Good print. Somewhat challenging to assemble.
Show original
0
Reply
A great design, but when assembling the front and back panels, make sure to pay attention to their directionality. Otherwise, they won't fit together properly.
Show original
0
Reply
Boosted
Print Profile
Only Hygrometer
Printed with PLA and it was bit tight on joints. I have to sand a bit but eventually it was good.
0
Reply