Castellano
Este llavero representa el logo del juego Zenless Zone Zero. Está diseñado en Fusion 360 y cuenta con un agujero para la anilla en la parte superior.
Alto: 36 mm
Ancho: 31 mm
Profundidad: 3 mm
Se recomienda imprimir con una boquilla de 0,4 mm.
La altura de la capa debe ser de 0,2 mm o menos.
No se necesitan soportes.
Coloca ambos modelos en el programa de laminado.
Gíralos para que las letras queden en la base.
La base debe estar sobre las letras; ten cuidado y verifica que encajen correctamente.
Imprime primero las letras y luego la base para que todo se imprima en el mismo lugar y se mantenga junto al retirarlo de la cama.
Se deja el archivo listo para imprimir (PrusaSlicer).
English
This keychain represents the logo of the game Zenless Zone Zero. It is designed in Fusion 360 and features a hole for the ring at the top.
Height: 36 mm
Width: 31 mm
Depth: 3 mm
It is recommended to print with a 0.4 mm nozzle.
The layer height should be 0.2 mm or less.
No supports needed.
Place both models in the slicing program.
Rotate them so that the letters are on the base.
The base should be on top of the letters; be careful and verify that they fit correctly.
Print the letters first and then the base, so that everything prints in the same spot and stays together when removed from the bed.
The file is provided ready for printing (PrusaSlicer).
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)