Spider-Man PS5 Textured Helmet by Budwin

Budwin

Props & Cosplays>Masks & Helmets

Print Profile(10)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Read Description; 93% Scale,0.2mm layer, 3 walls, 10% infill

34.3 h

4 plates

5.0(102)

OPTIMIZED 93% scale 0.2mm layer, 3 walls, 10% infill

33.9 h

4 plates

5.0(72)

100%, less Support, no AMS, 0.2mm layer, 2 walls, 10% infill

35.1 h

4 plates

5.0(39)

Please read description; 0.2mm layer, 3 walls, 10% infill

84.4 h

4 plates

5.0(19)

Click to see more

Open in Bambu Studio

Boost

1346

2106

457

520

3.9 k

1.3 k

Released

Description

Spider-man Ps5 Textured Helmet

Uses 7x1mm magnets

Enjoy

Comment & Rating (457)

@bbush362

Boosted

Printed and scaled at 93%. Came out amazing! Didn't have the proper colors so I just have to paint it. Thanks for model. This is the updated painting so far.

(Edited)

@user_1599442688

what size hat do you wear. trying to get a good size for my nephew

@bbush362

Boosted

Replying to @user_1599442688 :

I wear a 7-1/8 - 7-1/4.

@user_1384677486

by scaling it you made it smaller to fit your head ?

@wif1973

Boosted

Print Profile

Please read description; 0.2mm layer, 3 walls, 10% infill

Turned out better than I could ever hope for absolutely love it

The designer has replied

@bbush362

Boosted

Amazing I'm glad the profile worked out for you.

@user_1384677486

was there a lot of waste ?

@wif1973

Boosted

Replying to @user_1384677486 :

Yes, but zero post processing. Finished masked looked great as is.

@ClurGy

Boosted

Print Profile

Read Description; 93% Scale,0.2mm layer, 3 walls, 10% infill

First helmet I’ve tried printing. Scaled it down for my kids and it came out amazing. Might have to make a larger one for myself now! I’m very happy with it!

@mukul_k

what % did you scale to for your kids?

@PineApleOnPizza

Replying to @mukul_k :

if it's any help, I scaled it down for my 5 year old daughter to 84%. head circumference for her is roughly 21 inches.

@mukul_k

Replying to @PineApleOnPizza :

thanks!

@cdx1967

Boosted

Print Profile

OPTIMIZED 93% scale 0.2mm layer, 3 walls, 10% infill

Fantastic model as has come to be expected from Budwin. I printed this one in a single color (Creality Hyper Red) at 93% to reduce waste. The lines on the mask were then filled in with Creality Basic Black PLA using a heat gun. My Grandson loves it. Currently printing one a little larger for me. Thanks to the model maker for sharing their work. *Last three photos are of my second print at 100% where we improved on the inlaying of the black webbing lines.

@Dizzle_Prints

you just laid the filament in the gaps and heated it with a heat gun.

@cdx1967

Boosted

Replying to @Dizzle_Prints :

Yes...I heated a small section and used a small square of cardboard to press it in. The cardboard also acts as a heat shield for your fingers.

@Snobbz

Replying to @cdx1967 :

Impressive level of patience, bet that took a wee minute doing all the inlay! Had two ideas for those lines, first idea expands on your own method - measure width and depth of the groove, print long rectangle strips and insert using your technique Second method - Wee bottle with a thin nozzle, Acrylic paint with the "Angelus 2-hard" addative mixed in then draw rhe lines in. The raised lines you've created look amazing btw, makes it look closer to the older Spidey masks👌

@Srj_85

Boosted

Print Profile

Read Description; 93% Scale,0.2mm layer, 3 walls, 10% infill

amazing thank you! great prints thanks for making it so easy! printed at 100% as well. thanks again my son loves them as well

The designer has replied

@bbush362

Boosted

Budwin definitely makes some great files. Your prints came out amazing.

@user_445950361

what size is the magnet on 100%

@pedromartine

Replying to @user_445950361 :

description says 7x1

@kingtroopa

Boosted

Print Profile

100%, less Support, no AMS, 0.2mm layer, 2 walls, 10% infill

Printed a second time around, This time at 100%, my head size seemed to require 100-101% (I am roughly 104.2% on head4), but 101% would not fit on the build plate with the proper supports no matter what I did. I am pleased to announce that 100% fits me fine. Model came out slightly more in need of some post processing than the 93% profile which came out practically flawless but still looking fantastic. Added a picture so you can see the size difference of 93% vs 100%

@Dizzle_Prints

Would this fit a circumfrance of 25 inch head? do you know yiur circumfrance? Just trying to compare amd see if 100% is the size I need.

@kingtroopa

Boosted

Replying to @Dizzle_Prints :

I don't think so. My head size is roughly 23-7/8ths and the helmet has very little wiggle to it printed at 100%. You would need to double check using SaturdayMorningProps sizing video and then once you have that figured out you will probably need to cut the model and print in 2 pieces once you go above 100%.

(Edited)

@user_445950361

at 100% what size magnet did you use ?

@RobsA1

Boosted

Print Profile

100%, less Support, no AMS, 0.2mm layer, 2 walls, 10% infill

printed flawlessly and put together printed at 100% supports worked awesome just peeled off nice and easy thanks again!

@xxTaCoExTrEmOxx

Boosted

What slicer did you use for supports? I’m using Bambu Studio and I can’t get them to work

@RobsA1

Boosted

Replying to @xxTaCoExTrEmOxx :

Bambi slicer I just used the designers model at 100% optimised less support profile worked a treat 👍

@andrew4atl

what filament did you use?

@hasriqhaiqal

Boosted

Print Profile

Read Description; 93% Scale,0.2mm layer, 3 walls, 10% infill

NICE!!

@user_767034308

which filament is that?

@hasriqhaiqal

Boosted

Replying to @user_767034308 :

PLA-Pro (pink)

@user_1825212898

May

@GASilverHunter

Boosted

Print Profile

OPTIMIZED 93% scale 0.2mm layer, 3 walls, 10% infill

This model is incredible. at the 93% size from the project it was a perfect fit for me 22.5 head. I will say the 7x1mm magnets in the description is wrong. I ordered 100 of them from Amazon and they are slightly too big. I had to order some 6x1mm today and hopefully they will fit. love this model though. oh yeah I added the black lines with an ultra fine sharpie. worked better than the fine tip as it could actually fit down in the grooves.

The designer has replied

@LoudBobAcorn

Boosted

oh yeah forgot to add the magnets i got. i did also get 6x1mm so u should be good

@GASilverHunter

Boosted

Replying to @LoudBobAcorn :

One update... the 6x1mm magnets to hold the backplate in do work, but if you actually intend on wearing the mask, say at a convention, the weight of the back plate is a bit much for the 8 tiny magnets. I had to add a second set of poster putty dots in between the magnets for a more secure fit. Still love the model, but if you do plan on wearing it, be warned.

@Lafic

Boosted

Print Profile

Read Description; 93% Scale,0.2mm layer, 3 walls, 10% infill

the best model I’ve ever printed, thank you very much!!!!!

@carkissm

Painted in black or printed in multicolor?

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Venom Helmet with Movable Jaw

Budwin

516

830

Print Profile(10)

Description

Comment & Rating (457)

License

Related Models

Venom Helmet with Movable Jaw

SPIDER-MAN STRING-ART / MARVEL / SPIDER MAN (LOGO)

Iron Man MK 3 Helmet

ironman helmet