Quicky (Angle grinder wrench) by laisch

laisch

Tools>Other Tools

IP Report

GIF

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 6 walls, 25% infill

Designer

1.5 h

1 plate

4.8(73)

Single color, strong, 0.2mm layer, 6 walls, 25% infill

1.3 h

1 plate

4.7(30)

No Logo 0.2mm layer, 5 walls, 25% infill

1.3 h

1 plate

5.0(7)

ASA - 0.2mm layer, 6 walls, 25% infill

1.4 h

1 plate

4.3(3)

Open in Bambu Studio

Boost

543

837

122

1.1 k

671

Released

Description

Info: The wrench fits for anglegrinder nuts with 35mm hole circle diameter. But like some comments mention there are also other types of nuts with 28 or 20 mm hole distance. Check your dimensions before you print it

Found this Idea in the video of pocket83 and had to do a 3D printed version of it

The model prints without supports if you use 0.2mm layerheight.

For furhter hardware you need at least 2 M5x20mm hex nut screws.
You can screw them directly in to the model. If the fit is too tight you can tap the holes before screwing the screws in.

Comment & Rating (122)

@mechprone

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

Printed great. Unfortunately it doesn't fit my Makita cordless grinder (28mm center to center screws) but I didn't reduce my rating as I still think it's a great design. I plan on remixing it to fit and will upload.

(Edited)

@TaeMatoe

Didn't fit mine either. Trying another at 82.5% Confirmed 82.5% fits my grinder with 6-32 x 3/4 screws and nuts.

(Edited)

@laisch

Thx for the info and sorry for the wasted plastic. I thought the size with 35mm for the standard 125 disk angle grinder is the norm. I put a Info now on top of the project.

@kaliga3

Perfect! Thank you!

@GHPMDESIGN

Print Profile

No Logo 0.2mm layer, 5 walls, 25% infill

printed flawless, howver the pockets could be bigger and not for children hands :D

@jamedeo

Boosted

Great print! I went with the 28mm version for my grinder. Love the pocket83 shout out too, such an under appreciated channel.

@Tsinatas

Print Profile

0.2mm layer, 6 walls, 25% infill

Nice

@wireis

Print Profile

0.2mm layer, 6 walls, 25% infill

Cool print they look great, thanks for sharing your design! I printed one for myself and one for a work mate, luckily his Milwaukee and my Dewalt were both 35mm