Fully screwless print-in-place box

/ various sizes, with logo and label placement option /

This collection contains the following models:

• 100x50x30 inner cavity box ( 110x60x40 outer dimension ) in three variation:
  • Plain top
  • Top with LOGO seat ( can accomodate insert with the following dimensions: 20x20x1,6-1,8mm with 3mm radius )
  • Top with smaller LOGO ( can accomodate insert with the following dimensions: 15x15x1,6-1,8mm with 3mm radius ), and LABEL seating ( can accomodate insert with the following dimensions: 40x10x1,6-1,8mm with 3mm radius )
• 100x50x50 inner cavity box ( 110x60x60 outer dimension ) in three variation:
  • Plain top
  • Top with LOGO seat ( can accomodate insert with the following dimensions: 20x20x1,6-1,8mm with 3mm radius )
  • Top with smaller LOGO ( can accomodate insert with the following dimensions: 15x15x1,6-1,8mm with 3mm radius ), and LABEL seating ( can accomodate insert with the following dimensions: 40x10x1,6-1,8mm with 3mm radius )
• 160x80x30 inner cavity box ( 170x90x40 outer dimension ) in three variation:
  • Plain top
  • Top with LOGO seat ( can accomodate insert with the following dimensions: 20x20x1,6-1,8mm with 3mm radius )
  • Top with smaller LOGO ( can accomodate insert with the following dimensions: 15x15x1,6-1,8mm with 3mm radius ), and LABEL seating ( can accomodate insert with the following dimensions: 40x10x1,6-1,8mm with 3mm radius )
• 160x80x50 inner cavity box ( 170x90x60 outer dimension ) in three variation:
  • Plain top
  • Top with LOGO seat ( can accomodate insert with the following dimensions: 20x20x1,6-1,8mm with 3mm radius )
  • Top with smaller LOGO ( can accomodate insert with the following dimensions: 15x15x1,6-1,8mm with 3mm radius ), and LABEL seating ( can accomodate insert with the following dimensions: 40x10x1,6-1,8mm with 3mm radius )
• For every size there is an insert that fits the bottom half of the box. Combine it with your parts ( as negative parts ) to create custom holders.

For other dimension please check out my other collection:
https://makerworld.com/en/models/554041#profileId-472651

If you are printing the models on non-Bambulab printers please bare in mind the following:

• Use support of the lower part of the lock, and if you want to print one of the boxes with logos, use support on the logo seatings as well
• Prevent using any support on the hinges and on the hinge of the lock.
• Increase infill at the hinge section and its close proximity.
• Due to some exporting errors, the step files contain a small fragment body at the lower part of the hinge that needs to be manually deleted before printing. ( sorry about that:) )

In case you have any feedback, feel free to share. 
Im curious to see what you make of the model. If you print one please post a photo of it as an inspiration for others.

CHINESE VERSION (PROVIDED BY TRANSLATE:D)

完全无螺丝就位打印盒

/ 各种尺寸，带有徽标和标签放置选项 /

该系列包含以下型号： 100x50x30内腔盒（110x60x40外部尺寸）三种变化： 平顶 顶部带LOGO座（可容纳以下尺寸的刀片：20x20x1,6-1,8mm，半径3mm） 顶部带有较小的 LOGO（可容纳以下尺寸的插入物：15x15x1,6-1,8mm，半径为 3mm），以及 LABEL 座（可容纳以下尺寸的插入物：40x10x1,6-1,8mm，半径为 3mm） 100x50x50内腔盒（110x60x60外部尺寸）三种变化： 平顶 顶部带LOGO座（可容纳以下尺寸的刀片：20x20x1,6-1,8mm，半径3mm） 顶部带有较小的 LOGO（可容纳以下尺寸的插入物：15x15x1,6-1,8mm，半径为 3mm），以及 LABEL 座（可容纳以下尺寸的插入物：40x10x1,6-1,8mm，半径为 3mm） 160x80x30内腔盒（170x90x40外部尺寸）三种变化： 平顶 顶部带LOGO座（可容纳以下尺寸的刀片：20x20x1,6-1,8mm，半径3mm） 顶部带有较小的 LOGO（可容纳以下尺寸的插入物：15x15x1,6-1,8mm，半径为 3mm），以及 LABEL 座（可容纳以下尺寸的插入物：40x10x1,6-1,8mm，半径为 3mm） 160x80x50内腔盒（170x90x60外部尺寸）三种变化： 平顶 顶部带LOGO座（可容纳以下尺寸的刀片：20x20x1,6-1,8mm，半径3mm） 顶部带有较小的 LOGO（可容纳以下尺寸的插入物：15x15x1,6-1,8mm，半径为 3mm），以及 LABEL 座（可容纳以下尺寸的插入物：40x10x1,6-1,8mm，半径为 3mm） 对于每种尺寸，都有一个适合盒子下半部分的插入物。将其与您的零件（作为负零件）结合起来以创建定制支架。 如果您在非 Bambulab 打印机上打印模型，请记住以下几点： 使用锁下部的支撑，如果您想在其中一个带有徽标的盒子上打印，也请在徽标座椅上使用支撑 避免在铰链和锁的铰链上使用任何支撑物。 增加铰链部分及其附近的填充。 由于一些导出错误，步骤文件在铰链下部包含一个小片段体，需要在打印前手动删除。 （ 对于那个很抱歉：） ） 如果您有任何反馈，请随时分享。 我很好奇你对这个模型的看法。如果您打印一张，请发布一张照片作为其他人的灵感。