Soda Can Opener - Nail Saver

Abenalbert
Tools>Gadgets
IP Report

Soda Can Opener - Nail Saver

Abenalbert
Boost
256
481
121

Print Profile(3)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1
H2D
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
34 min
1 plate
4.9(91)
0.2mm layer, 2 walls, 15% infill (5 Pack)
0.2mm layer, 2 walls, 15% infill (5 Pack)
1.3 h
1 plate
4.9(8)
0.15mm layer, 5 walls, 10% infill (5 pack)
0.15mm layer, 5 walls, 10% infill (5 pack)
1.7 h
1 plate
4.5(4)
Open in Bambu Studio
Boost
256
481
121
78
949
738
Released

Description

Boost Me (for free)

One boost from you brings me closer to buying my very own printer! 😊

There is now a new, much better version available. You can download it here: https://makerworld.com/en/models/955197

Overview

Not much to say. It opens soda cans very very well

Print instructions

Tested with 0,4 mm nozzle and 0,15 layer height and 90% infill. And it works very well.

Print with brim or raft if you have problems with build plate adhesion.


After printing

After its done printing, you take it off the build plate, slide the model on the soda can tap, and then simply push up to open the soda can.

 

Feel free to boost:)

opener
gadget
helper
helpful
sodacan
nails
helpers
nailtech
sodacancover

Comment & Rating (121)

(0/5000)
@UrbanCraft
Boosted
works great. I am going to donate like 50 of each style to the Ot I go see. to help others out.
(Edited)
The designer has replied
1
Reply
@AbenAlbert
give me a follow here: https://makerworld.com/en/@AbenAlbert
(Edited)
1
Reply
@kridah
Boosted
Print Profile
0.15mm layer, 5 walls, 10% infill (5 pack)
printed a bunch of these for my spouse to give to her coworkers. printed without issues
1
Reply
@user_633435928
Boosted
This works!! It’s the best thing ever and I love it! 🥰 Gotta be sure to slide it all the way down the popper or the opener will bend it and you’ll be stuck with an unopened soda with no popper😅
0
Reply
@vong
Print Profile
0.2mm layer, 2 walls, 15% infill
Just what the wife wanted with her nails.
0
Reply
@user_3671354704
Print Profile
0.2mm layer, 2 walls, 15% infill
came out really good
0
Reply
@ryanandy
prints super quick and works well
0
Reply
@Snorl3x
Print Profile
0.2mm layer, 2 walls, 15% infill
good design just has a easy break point in the middle
0
Reply
@arturor209
Print Profile
0.2mm layer, 2 walls, 15% infill
works great
0
Reply
@CelicaPetz
Print Profile
0.2mm layer, 2 walls, 15% infill (5 Pack)
1
Reply
@Claudia2024
Print Profile
0.15mm layer, 5 walls, 10% infill (5 pack)
Missing Model Parts:Unfortunately 3 of the four did not have the rounded finish no big deal however strange
0
Reply
@UrbanCraft
Boosted
that is a failed print. either you had lack of bed adhesion or something else happened
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Soda can opener and use as lid

Soda can opener and use as lid

Pocketrush
2
8
26
Customizable Cable Clip with Nail or Screw

Customizable Cable Clip with Nail or Screw

amzoo
3
233
98
TPU Soda Saver

TPU Soda Saver

HenrySJ5000
0
2
3
PET Bottle Cap Opener

PET Bottle Cap Opener

VD15
0
15
19
PrivacyTermsGuidelinesFAQCookie SettingsHot Searches
© 2025 MakerWorld