2024/7/29 Update:

增加了胸甲部件，有迪迦标志性的胸灯和披肩。

Added chest part with Tiga's signature chest light and cape.

这次做了个Dummy13迪迦头雕。0.12层高不用加支撑，但一定要加Brim，因为底面接触面很小。Brim宽度不要用自动，可能会翻车。我设置了10mm，效果可以看图片。
This time I made a Dummy13 x Ultraman Tiga head sculpture. 0.12 layer height no need to add support, but make sure to add Brim because the bottom contact surface is very small. Don't use auto for the Brim width, it may roll over. I set it to 10mm, you can see the pictures for the effect.

另外，这次偷懒没做眼睛分件，只做了分色。有需要的话同样可以留言。

In addition, this time I was lazy and didn't do the eye parts, only did the color separation. You can leave a comment if you want them.

Dummy13的脖子有点长，我做了个缩短版本的，可以去初代奥特曼头雕那里下载打印：

The neck of Dummy13 is a bit long, I made a shortened version, you can download and print it from the Ultraman head sculpts here:

Dummy 13 Ultraman / Dummy 13 奥特曼 二次创作 - 来自 daokouxiaxingzou - MakerWorld

我还做了些别的东西：
I made some other stuff:

Dummy 13 x Ultraman Zero 来自 daokouxiaxingzou - MakerWorld

P1S Lead Screw Shields / P1S丝杠保护罩 来自 daokouxiaxingzou - MakerWorld

Xiaomi 14 case / 小米14手机壳 来自 daokouxiaxingzou - MakerWorld

反转拍镜片收纳盒/Flipper Lenses Storage Box 来自 daokouxiaxingzou - MakerWorld