I created the picture of Hogwarts castle using AI and turned it in to a Hueforge image.

Please read the instructions carefully .

Unfortunatley the file takes to long to slice for makerworld and thus wont let le upload it.

So you will have to download the zip folder, the print profile is included aswell as the raw .stl and the description text.

It will take some time to slice.

I adjusted the printer profile to Bambu recommandations for Hueforge, 0.04mm layerheight with 0.4mm nozzle.

This Hueforge uses 6 unique colors, but i only used 1 AMS.

To achieve this, you have to swap the first 2 spools during the print, i programmed a pause at layer 36 (at 8h42min).

How to proceed:

-Put the first 4 Filament in the AMS in the order they are used, A1=Black; A2= Blue; A3= Blue/Grey; A4= Orange

-Start the print

-At layer 36 (during the pause) unload the filaments in slot 1 and 2 of the AMS,

-put Yellow in slot 1

-put White in slot 2

-push resume print

Hueforge settings:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 219.6x219.6mm in size
You may print at higher layer heights below the Min Depth of 1.6mm
The Max Depth is 4.5mm and the Actual Depth is 3.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:

Start with Black
At layer #40 (1.72mm) swap to Blue
At layer #45 (1.92mm) swap to Blue Gray
At layer #58 (2.44mm) swap to Orange
At layer #64 (2.68mm) swap to Yellow
At layer #68 (2.84mm) swap to Jade White for the rest.