Green Bay Packers LED Lamp

Copyright Claim

Green Bay Packers LED Lamp

Boost
11
28
4

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill
(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill
Designer
8.5 h
3 plates
4.3(3)

Open in Bambu Studio
Boost
11
28
4
2
34
20
Released

Description

Here's another to add to the NFL teams. I have 6-7 more teams to do and then they will all be available for download on my account for fans. I have 5-6 that I'll be uploading either today or this weekend. I plan on re-making some of my earlier lamps to the new style of design that I make them with which is different than my Youtube tutorial a bit. Enjoy!

 

Settings: The print profile settings are setup specifically for the frontplate only so you won't have wisps or colors bleed into each other or have those random dots of a darker color that you can only see when you get a light behind it. These are the best settings I've found to take care of that out of the 1000s of lamps I've printed. When going to print the backplate, be sure to change the filament settings. You'll want to change the first layer and other layers temps back to 220 on both. Then you can choose to take off retraction and zhop but it won't mess with the quality either way.

Comment & Rating (4)

Please fill in your opinion
(0/5000)

Print Profile
(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill
great profile for lightboxs! I unfortunately didn't know the back with the stand is smaller so I printed that one first... so if you print the face normal make sure you print the hanger back as that's the correct size.
0
Reply
Boosted
Print Profile
(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill
I found out the hard way that I printed the face for the wall hanging light box. I wanted the one with the built in stand. Them later I figured out that I could print the smaller face with adjusting the scale. To save others from confusion, it might be best to add a 4th build plate with the smaller face to the file. Other than that little issue, it printed amazingly!!! your setting are great. I used all BBL Basic PLA with your setting and had zero issues.
0
Reply
The stand doesn't fit the sign
0
Reply
Print Profile
(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill
front plate fell apart
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.