Delta Drill Press Switch Cover Mount

Copyright Claim

Delta Drill Press Switch Cover Mount

Boost
1
0
0

Print Profile(1)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
A1 mini

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
Designer
1.7 h
1 plate

Open in Bambu Studio
Boost
1
0
0
0
1
0
Released

Description

This is a switch box/cover for a Delta drill press. Most of the Delta drill presses from this era use a similar box so this will likely fit other models.

 

Note: Depending on your switch, you may have to Dremel/modify the switch opening and the rear of the cover so that your switch/wiring can fit and that it can mount to the drill press. I purposely left this up to the user to modify so you can use a different replacement switch if you are missing the OEM switch or fit it to a different model drill press.

 

It's strong enough to drive a few screws through it. It's better to drill out pilot holes before doing that though so it doesn't ruin it. You can take the ruler from the original cover and stick it on if need be (what is shown in the pic).

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more