Making beautiful timelapses on your Bambu Lab A1.

With this mod you can connect an external camera using a Raspberry Pi and a DSLR or other camera. We do not change any GCODE or anything on the printer. As we can run the complete standard printing profile in Bambu Studio. 

In Bambu Studio all you have to do is Enabling Smooth timelapses and you are done.

Installation

• You need to have a magnetic door sensor you can connect to the GPIO pins on the Raspberry Pi. I use GPIO26 and Ground.
• You need to print out this design and install it at the screw that also holds the Poop Shute.
• You need to put on the Magnetic Sensor on to the arm, and put a Magnet on the printing head. Make sure it dosent collide in any way.
• For good measure please recalibrate the printer, as you have changed the weight now.

Download and run the Github code, make sure to follow the guide in there: https://github.com/NPetersenDK/BambuLab-Smooth-Timelapse 

Required parts:

• A Raspberry Pi
• A Magnet sensor which costs a few bucks - i used the following: https://www.aliexpress.com/item/1005006027619189.html
• A camera supported on a Raspberry Pi, using USB. I used a Sony A6000.