MINI All In One 3D printer test

Remixed by
Copyright Claim

MINI All In One 3D printer test

Remixed by
Boost
60
150
27

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 100% infill
0.2mm layer, 2 walls, 100% infill
Designer
1.5 h
1 plate
4.8(24)

Open in Bambu Studio
Boost
60
150
27
25
543
314
Released

Description

"After my latest design (All In One 3D printer test) got really popular, I've decided to make new, better, smaller and more detailed design.

I've literally started again from scratch, with few things in head - make it smaller, more detailed, and low on material. I think that I've done pretty good job!

!PRINT THIS WITHOUT SUPPORTS AND WITH 100% INFILL!

I hope that you'll like this design, don't forget to share your own 3D printout!"

 

Creator - majda107

Origin - https://www.thingiverse.com/thing:2806295

Comment & Rating (27)

Please fill in your opinion
(0/5000)

Ender3 V3 Ke 0.2mm layer, 2 walls, 100% infill Everything looks good except 1. Stringy at bottom of 80 degree overhang 2. Very fine stringy between two overhang 3. Bottom text squish and hard to read 4. 10 mm scale on mine measured 10.25 Any suggestion?
The designer has replied
0
Reply
Sorry to hear this, these are my recommendations: 1. The 80 degree overhang stringing is mostly to be expected so i think your good there :) 2. That may be a problem with the filament that you are using, I'd recommend trying it with another. 3. I'd recommend double-checking your z-offset to make sure it is properly calibrated. 4. You may have to recalibrate your steps per mm, you can find many videos online to help you solve this. Hope this helps!
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
one test to test them all
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
Looks good by my first 3D printer of P1S.
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
love this test print
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 100% infill
Good test, but my filament was too old and had absorbed moisture
Show original
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
Printed Well
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
Great little low filament use test. Will probably become my new ‘first print’ for each new filament
0
Reply
Boosted
very useful model
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
good test
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
Printed ok. Was not impressed by overhang quality. I did compare with my print in my ender 3v2 and i think the one from my ender is slightly better.
0
Reply