Do NOT adjust the size in your slicer!! The layers will not come out right.
Do not change the size, this will cause errors in color change compromising the entire print.
Use my print profile or you will not get the desired results.
It can be printed safely without AMS and on any printer.
I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!
Framework is here:
https://makerworld.com/en/models/372009#profileId-271950
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Matte Ice Blue Transmission Distance: 1.9
PLA BambuLab Matte Ivory White Transmission Distance: 1.7
PLA BambuLab Basic BambuLab Green Transmission Distance: 2.7
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Ice Blue
At layer #11 (0.96mm) swap to Ivory White
At layer #14 (1.2mm) swap to Charcoal
At layer #15 (1.28mm) swap to BambuLab Green
At layer #21 (1.76mm) swap to Ivory White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)