Inside was a little rough, but overall I'm very pleased with the result. You win a boost :)

Third D Printing

handy (EU 37 - 46 sizes)

thank you so much! which printer, nozzle and filament did you use?

Thanks! To reduce roughness, please use the gcodes. 

Edit: no longer necessary, shared a new profile for smoother results

Ciao! Just uploaded the print profile, you might increase speed up to 150% / 200% with 95A and adjust temperature to fit your filament needs

Song

Ciao Alessio,I'm interested for this model. Are the parameters the same if I use TPU-95A? have a nice day !

Hi! You should use 0.6mm nozzle, especially for G1 which prints thick 1.2mm wide lines. You might try with 0.4mm nozzle on other models such as Tora or Aspys

NanlinWWW

Hello Alessio, I'm intrested to print this model. Do u recommend print this model with 0.4 nozzle? And if i would like to print with 0.4 nozzle, should i change anything from your Gcode?

Hi thanks! The pattern comes from slicing, please check out the print profile

Look nothing like the picture at all and not in a good way, more like a Mrs. Roper kinda way........... No net holes, solid.

user_239430548

tu parlo italiano? io solo parlo Italiano, e io l’solo uno. 😭

Do you speak Italian? I only speak Italian, and I am the only one. 😭

CoPrism

cover

3.1.jpg

G1_2.1L.jpg

G1_3.1L.jpg

rough.1.jpg

EU 37 Right

plate_1.png

EU 37 Left

plate_2.png

EU 38 Right

plate_3.png

EU 38 Left

plate_4.png

EU 39 Right

plate_5.png

EU 39 Left

plate_6.png

EU 40 Right

plate_7.png

EU 40 Left

plate_8.png

EU 41 Right

plate_9.png

EU 41 Left

plate_10.png

EU 42 Right

plate_11.png

EU 42 Left

plate_12.png

EU 43 Right

plate_13.png

EU 43 Left

plate_14.png

EU 44 Right

plate_15.png

EU 44 Left

plate_16.png

EU 45 Right

plate_17.png

EU 45 Left

plate_18.png

EU 46 Right

plate_19.png

EU 46 Left

plate_20.png

This profile makes slightly rough shoes, not noticeable with thick socks. Use the other profile for better results&nbsp;&nbsp;Use 0.6 nozzle and 95A TPU. Overture is good, some 95A break fast. Softer filaments (90A or less) won&#39;t print on stock Bambulabs, only on A1 with <a target="_blank" href="https://makerworld.com/en/models/95155#profileId-101634" rel="nofollow noopener">this</a> upgrade and no PTFE tube. Don&#39;t use: “high speed”, “high flow” (too stiff)&nbsp; Don&#39;t change filament presets. If the overhang fails, reduce temperature (as low as 200°C depending on the filament)  If using Bambu Studio, some settings change when switching printer even if you click “use settings”, so print from the mobile app or carefully check.  Best (long lasting comfortable shoes):<ul><li>80A (Recreus 82A, 3D fils 85A)</li></ul>&nbsp;Ok (might be slightly uncomfortable in the toe area where the foot bends and break there after a while):<ul><li>95A (Overture)</li><li>90A (Polymaker) </li></ul>&nbsp;Don&#39;t use:<ul><li>Ninjatek 75A, Esun 83A, Azurefilm 85A, Siraya 85A, Varioshore, Recreus 60A, 70A, Foamy (bad layer adhesion)</li><li>Basf 85A, Extrudr 85A, (not really 85A)</li></ul>&nbsp;Shoe:<ul><li>layer height: 0.36mm</li><li>line width sparse infill: 1.2mm</li><li>wall loops: 0</li><li>top shell layers: 0</li><li>bottom shell layers: 0</li><li>sparse infill density: 38%</li><li>sparse infill pattern: Grid</li><li>Length of sparse infill anchor: 1000 (unlimited)</li><li>Length of sparse infill anchor: 1000 (unlimited)</li><li>Infill direction: 45°</li><li>Detect narrow internal solid infill: no</li><li>Speed sparse infill: 15 mm/s</li><li>Enable support: no</li><li>Reduce infill retraction: no</li></ul>Cube Settings modifier  (256x256x1.1mm centered at height 1.8mm to make a 3 layers platform):<ul><li>Sparse infill density: 60%</li><li>Sparse infill pattern: Rectilinear</li><li>Infill direction: 0°</li></ul>&nbsp;Filament:<ul><li>Wipe while retracting: no</li><li>Max volumetric speed: 6 mm^3/s</li></ul>&nbsp;You may also use the universal gcodes in “G1_print files.zip” folder

G1_p2.jpg

EU 37 Right 

EU 37 Left 

EU 38 Right 

EU 42 Rigth

IMPORTANT: <ol><li>don&#39;t print from the mobile app</li><li>open the profile in Bambu Studio. Every plate has 2 hidden identical overlapped models:<ul><li>enter the “objects” panel and activate BOTH the models by clicking on their square toggles</li></ul></li></ol>Click “download stl/cad files” and download “G1_activated.3mf” to get a profile with already activated models and skip the previous step.&nbsp;The grid pattern is made by combining 2 pependicular rectilinear patterns. This makes an higher quality smoother shoe compared to the standard “grid” infill pattern.&nbsp;Makerworld won&#39;t let me upload the profile with already activated models because of the warning “conflicts of gcodes”&nbsp;&nbsp;Use 0.6 nozzle and 95A TPU. Overture is good, many others break fast. Don&#39;t use “high speed”, “high flow” filaments (too stiff).&nbsp; Keep this profile&#39;s filament presets. If the overhang fails, reduce temperature (as low as 200°C depending on the filament)  Carefully check that all settings transfer when switching printer in Bambu Studio  Best:<ul><li>80A * [Recreus 82A (220 °C), 3D fils 85A]</li></ul>&nbsp;Ok:<ul><li>90A *</li><li>95A </li></ul>&nbsp;* won&#39;t print on stock Bambulabs, only on A1 with <a target="_blank" href="https://makerworld.com/en/models/95155#profileId-101634" rel="nofollow noopener">this</a> upgrade and no PTFE tube. &nbsp;&nbsp;No: <ul><li>Ninjatek 75A, Esun 83A, Azurefilm 85A, Siraya 85A, Varioshore, Recreus 60A, 70A, Foamy (bad layer adhesion)</li><li>Basf 85A, Extrudr 85A, (not really 85A)</li></ul>

smooth (EU 37-46 sizes)

Size chart<figure class="image image_resized" style="width: 53.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000527594/design/2024-11-28_cc725b45ba806.png"></figure>

G1 shoes

Global

Print Profile(2)

Description

Comment & Rating (22)

License

Related Models

Shoe Rack

Modular Shoe Rack

Quick-Slip Shoe Horn

Shoe hanger