Heavy Plate Knight - Heavy Plate Knight Remixed by 喵匠Meowcraft

Remixed by

喵匠Meowcraft

Hobby & DIY>Other Hobby & DIY

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 3 walls, 15% infill

Designer

9.3 h

3 plates

3.9(51)

0.08mm layer, 3 walls, 15% infill

Designer

11.6 h

2 plates

3.5(10)

0.12mm layer, Print tested and fitted using PETG + PLA

9.4 h

3 plates

3.6(12)

Open in Bambu Studio

Boost

1014

1834

153

116

1.9 k

645

Released

Description

基于dummy 13 骨架设计的中世纪板甲骑士，根据荣耀战锤重装骑士改型设计而来

----从零开始建模学习 3dmax，历时半月设计，打印，后续还会继续改进，各位朋友如果有改进建议欢迎与我讨论

---- 关于缺失骨架的问题，已经更新3mf 文件--请下载最新的3盘的3mf文件---骨架安装位置参考摆盘方式，另外单独的骨架文件在STL的下载按钮中。。。放错地方了

------ 不适配原版dummy 13 骨架，因为比例问题对骨架做了一定的调整

------ 说明书在做了，本人社畜吗喽，平常忙于工作，周末发展下兴趣，望海涵

2024/07/21

更新安装视频

哔哩哔哩:https://www.bilibili.com/video/BV17e8GePEhv/?spm_id_from=333.999.0.0

youtube:https://www.youtube.com/watch?v=eJdBQhiDCdc

Medieval plate knight based on dummy 13 skeleton design, designed based on the modified version of Warhammer Heavy Knight

----Modeling from scratch and learning 3dmax, it took half a month to design and print, and will continue to improve in the future. If you have any suggestions for improvement, please discuss with me

--- Regarding the skeleton issue, the 3mf file has been updated---the installation position refers to the plate arrangement method, and the separate skeleton file is in the STL download button... It was put in the wrong place

------ Not suitable for the original dummy 13 skeleton, the skeleton has been adjusted to some extent due to the proportion problem

------ The manual is being made. I am usually busy with work and develop my hobbies on weekends.

2024/07/21

Update Installation Video

哔哩哔哩:https://www.bilibili.com/video/BV17e8GePEhv/?spm_id_from=333.999.0.0

youtibe:https://www.youtube.com/watch?v=eJdBQhiDCdc

Comment & Rating (153)

@K3LD3N

Boosted

Print Profile

0.12mm layer, 3 walls, 15% infill

I had a ton of fun making this. Decided to custom paint it too and make it look all battle worn and bloody haha. Took an old shirt and made a cape for it as well. It has inspired a bunch of my coworkers to print one out for themselves. Thanks for uploading this

The designer has replied

@Meowcraft

awesome！！！Thank you very much for letting me see such a wonderful print

@user_2547055855

Boosted

did you paint it after of before you put the figure together?

@DrSUMO

Dude, I do some mini painting and this is bad ass dude how it looks awesome

@Alexandremotsny

Boosted

I can't figure out how to connect these two. I've tried using the three-ball joint method, but the part that connects to the torso is rotated to the side and doesn't fit. (I'm using Google Translate because I've noticed you respond more to Chinese comments.)

(Edited)

The designer has replied

Show original

@Meowcraft

I will update an installation video this weekend. Many friends have reported that this location needs explanation. Please check the installation video then.

@Meowcraft

https://www.youtube.com/watch?v=eJdBQhiDCdc&;t=103s Installation Video

@botnutz

I know this old, but did you figure it out? I spent a while trying to figure it out and assuming I was using the wrong piece. I ended up pressing it against my desk and the joint slid in the armor far enough for it to work.

@binalbruno

Print Profile

0.12mm layer, 3 walls, 15% infill

so far i have printed half of the knight. generally the print came out really good. and everything fits well together. i had to reorient some of the pieces to print properly and also had to adjust the supports and brim for easier removal. Edit: i finished two prints. second one came out much better. the belt and the side skirts needs some more work to make them stay in place.

(Edited)

@nijok

thats a 200% of the original?? can you put the parameters or a profile to print it??

@binalbruno

Replying to @nijok :

that is at 100%. i will upload the print profile

@binalbruno

Replying to @nijok :

Hi, I have uploaded the print profile that I used. I used PETG for the skeleton and PLA for the armor. The side skirts on the belt are not well fitted, they always come loose (when using PLA, may be they will stress less if printed using PETG)

(Edited)

@yth1004hk

Print Profile

0.12mm layer, Print tested and fitted using PETG + PLA

It is an assembly nightmare

Show original

@magni

Boosted

It's a really cool model, but unfortunately it's very difficult to put together. The tolerances are very off, it requires sanding and cutting on certain parts, and some parts like the legs pegs I had to size down to 98% just so I can fit them in because they kept breaking. Many parts broke and I had to re-print or glue some together.