Hammer 2.0

DieProfikeit
Tools>Hand Tools
Copyright Claim

Hammer 2.0

DieProfikeit
Boost
43
74
9

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini
0.28mm layer, 10 walls, 95% infill
0.28mm layer, 10 walls, 95% infill
Designer
2.7 h
1 plate
5.0(2)
0.28mm layer, 10 walls, 95% infill
0.28mm layer, 10 walls, 95% infill
Designer
3.1 h
1 plate
A1 Mini [93.5% scale] - 0.28mm layer, 10 walls, 95% infill
A1 Mini [93.5% scale] - 0.28mm layer, 10 walls, 95% infill
2.4 h
1 plate
4.8(4)
Open in Bambu Studio
Boost
43
74
9
6
192
86
Released

Description

Boost Me (for free)

If you like it leave a boost!

I designed a soft blow hammer that fits my needs.
Its designed from the ground up but heavily influenced by Mr. MegaTronic THWACK https://www.printables.com/de/model/46099-thwack
 

The handle is hollow to get the balance right and not have to fiddle with different infills inside one model.
If you have an AMS I recommend using the AMS profile with PLA and PETG as interfacelayer for easy support removal.
ABS might be the best material for the handle part, but PLA is easier to print and sufficient.
With 150g the hammer is pretty substantial.

There is a version with changable TPU caps.
https://makerworld.com/en/models/520528#profileId-436944

hammer
tool
hand tool
workshop
thwack

Comment & Rating (9)

Please fill in your opinion
(0/5000)
@hack1sac
I have had this print fail on me 4 times now. I cant understand why its doing this. I've tried different supports, different flow rates, and different walls/infills but the same results every time.
(Edited)
The designer has replied
0
Reply
@DieProfikeit
In wich way is it failing? Lifting off the plate? Wich profile are you using? The filament is suspicously shiny, are you sure this is PLA not PETG?
(Edited)
0
Reply
@hack1sac
Replying to @DieProfikeit :
Using the P1P profile 0.28, 10 walls, 95% infill, no AMS. Its SunLu PLA + 2.0. As the pictures show it kind of looks like over extrusion? The hotend sounds like its dragging across already printed material. And its only on the first half. After that it starts printing correctly. Ive tried adding supports and that was no help.
0
Reply
@sikszamar
Boosted
Print Profile
A1 Mini [93.5% scale] - 0.28mm layer, 10 walls, 95% infill
Works as intended
0
Reply
@user_3974844655
Boosted
Print Profile
A1 Mini [93.5% scale] - 0.28mm layer, 10 walls, 95% infill
Nice print 😊
0
Reply
@Bobrozzzz
Print Profile
A1 Mini [93.5% scale] - 0.28mm layer, 10 walls, 95% infill
thick and chunky. scared it was going to break my nozzle. with how hard it pushes down for this infill.
0
Reply
@user_2179137646
Print Profile
0.28mm layer, 10 walls, 95% infill
0
Reply
@david.maldonado
Print Profile
0.28mm layer, 10 walls, 95% infill
0
Reply
@pastilli
Print Profile
A1 Mini [93.5% scale] - 0.28mm layer, 10 walls, 95% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Hammer and Sickle | for DUMMY 13

Hammer and Sickle | for DUMMY 13

DecoNRefleX
0
32
5
Thor's Hammer Mjölnir

Thor's Hammer Mjölnir

Sebastian
3
35
62
Hammer

Hammer

Jamo3
0
6
6
Pegboard Hammer Holder

Pegboard Hammer Holder

Jahara
0
2
1
PrivacyTermsGuidelinesFAQCookie SettingsHot Searches
© 2025 MakerWorld