Print Profile(4)
Description
Stake Clip for the Moss Pole (Original (118mm) and Petit (70mm)) by MochPoch
New Bamboo moss pole system has been released. Click here 🌱
As with conventional moss poles that get top-heavy over time, adding a stake is the usual next step.
If you'd like to support my projects or obtain a commercial license, consider joining my Patreon membership:
https://www.patreon.com/MochPoch
For one-time support, you can also fuel my creativity with a cup of coffee:
https://buymeacoffee.com/MochPoch
Boost Me (for free)
Thank you for the encouragement and support! 😊
The stake clips are available for 2 versions of the pole:
This two-sided clip snaps onto the backing of the moss pole and the stake. Position the wider opening of the stake clip pointing downwards. This will prevent the moss pole from releasing itself from the stake if it tilts forward. It will also ensure that the pole clip hugs the pole backing snugly.
The pole clip has 3 options:
| Clip | Compatible Stake Diameter |
|---|---|
| 8 mm | 8 to 9.5 mm |
| 11 mm | 11 to 13 mm |
| 16 mm | 16 to 19.5 mm |
Some Notes
- One could probably fit other stake dimensions, but I haven't tested beyond what I have listed above.
- The best stability addition that one can use is a heavy planter. Ensure that the stake is also placed in the planter.
I recommend PETG as it is more flexible for snapping the pole and stake on. I have tried using PLA, but it was harder to snap on.
| Parameter | Value |
|---|---|
| Nozzle diameter | 0.4mm |
| Layer Height | 0.2mm |
| Wall Loop | 3 |
| Top Shell Layers | 2 |
| Bottom Shell Layers | 2 |
I have uploaded a print profile if you'd like to print it with translucent PETG, as it has a different set of parameters.
- Requests are welcome - should you need a different dimension or a part specific to your need, let me know and I will try my best to make it available.
Thanks for checking out this attachment (and for reading up to this point). If you like what you see, don't forget to hit the like button and add a comment with a photo. Your support helps me collect points and keep this project going. If you want to support even more, I would appreciate a cup of coffee or a Boost. Good luck with growing the plant(s)! :D
| Version | Change Log |
|---|---|
| 1.1.0 | Added Stake Attachment for the Petit (70mm) moss pole |
| 1.0.0 | Original models added |
Thanks for checking out this model. You might be interested in my other projects:
Bamboo Moss Pole
Stackable Moss Pole
- Moss Pole Petit (70mm)
- Moss Pole (Modular & Half-closed 118mm)
- Moss Pole (Stake clip)
- Moss Pole (Watering Attachments)
Plant Care/Accessory
Planter
PetLibro Accessory
Please don't forget to like hit like, add a make and rating- it helps me collect points to keep these projects going. Happy growing! ☺️
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)