Greifer Bruder Bagger / Grab Bruder excavator by schuler87

schuler87

Hobby & DIY>Vehicles

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 30% infill

Designer

4.4 h

2 plates

4.8(6)

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

This is version 1. Please print version 2 as it has been improved in various ways.

https://makerworld.com/en/models/680641#profileId-609061

Demolition, sorting grab for Bruder excavators Adjustable gripper for Bruder excavators.

How the assembly works and which parts you need can be found in the PDF instructions.

I printed in PETG because PLA is not that strong.

---

This is version 1. Please print version 2 as it has been improved in various ways.

https://makerworld.com/en/models/680641#profileId-609061

Demolition and sorting grab for Bruder excavators

Adjustable gripper for Bruder excavators.

How the assembly works and which parts you need can be found in the PDF instructions.

I printed in PETG as PLA is not as strong.

Documentation (1)

Assembly Guide (1)

ZusammenbauanleitungGreifer.pdf

Comment & Rating (17)

@Xaider

Boosted

Print Profile

0.16mm layer, 2 walls, 30% infill

Nice Idea, only the left/right screw broke ones when I assemble the print

The designer has replied

@schuler87

Hello. Thank you for your feedback. Can you give me more information so I can improve the screw. Did you print with Petg? Thanks

@Xaider

Boosted

Replying to @schuler87 :

Hi, I printed it in PETG and PLA, and the PETG part broke at the screw on the turn knob side. Perhaps I turn the knob to tight, but I think the problem is the layer adhesion when turning the screw to hard it breaks. We will see if it survies my son :). I think increasing the screw diameter would help or

@schuler87

Replying to @Xaider :

Thank you very much for the feedback, I'm currently working on a larger version, so I'll take that into account. You can also attach the head with glue, then you don't have to tighten it so much. You can also lubricate the threads to make them run easier. Or you can try with other printing temperatures or infill🤷

@user_2297916852

Mega cool. I printed it with my Creality K1 out of ABS. The screw and nuts unfortunately did not turn out so well despite a 0.1 layer. I would improve the following in the next version: I would realize the right-hand thread part with a threaded rod and nut that is screwed/glued into the center part. This part is subjected to the most mechanical stress. The left-hand thread part made of metal will be difficult. At the swivel joint on the adapter plate, I would allow about 0.2 mm more clearance. Mine is very tight and broke very quickly. All in all, a great construction and hats off for the file. Really cool and my boys had a lot of fun with it.

The designer has replied

Show original

@schuler87

Thank you for your feedback. I am now aware of the issues. I have made a second version where the threads are also different and larger… unfortunately, I haven’t had time yet to write instructions for assembly, so it’s not uploaded yet. I will upload them soon. I am always happy to receive such feedback, as everyone can benefit from it… Thank you

(Edited)

Show original

@schuler87

Replying to @schuler87 :

Version 2 is uploaded: https://makerworld.com/models/680641

Show original

@user_4264681380

Boosted

Fits perfectly to the CAT brother excavator Many thanks

The designer has replied

Show original

@schuler87

Thank you for your feedback

Show original

@Fendt311

Print Profile

0.16mm layer, 2 walls, 30% infill

Mega

@user_440876936

Print Profile

0.16mm layer, 2 walls, 30% infill

The designer has replied

@schuler87

thank you very much for the rating👍🏻😃 I would be very happy about a boost token😃 thank you

@Manu

Print Profile

0.16mm layer, 2 walls, 30% infill

The designer has replied

@schuler87

thank you very much for the rating👍🏻😃

@b_botics

Boosted

Print Profile

0.16mm layer, 2 walls, 30% infill

@user_4264681380

Boosted

Print Profile

0.16mm layer, 2 walls, 30% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Documentation (1)

Comment & Rating (17)

License

Related Models

toy fidget grabber

Gripper, Toy

Extra handle for Snow Shovel

grabber stick reach thingy