USB Rotating Display by Brent PetersonMakerWorld: Download Free 3D Models

Brent Peterson

Hobby & DIY>Electronics

IP Report

GIF

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

All printed parts (0.20mm, 2 walls, 15% infill)

Designer

4 h

2 plates

4.8(41)

Additional Tables (66mm/150mm/200mm)

Designer

4.8 h

3 plates

5.0(10)

Upgraded Bearing (10mm steel balls, 10pcs)

Designer

1.8 h

1 plate

4.6(8)

a1 mini profile

7 h

4 plates

5.0(1)

Click to see more

Open in Bambu Studio

Boost

351

706

428

192

Released

Description

Boost Me (for free)

Like the model and want to support the designer? Click the button to boost, it's free! 🚀

USB Rotating Display

Turn your Marble Run Components Kit into a functional rotating display powered by the USB motor! No extra hardware is required; simply print the parts using the included profiles and assemble the completed model in minutes!

Create a unique display for your 3D prints (click for GIF on mobile)

Interested in the bearing model used for this design? Checkout my ball bearing OpenSCAD script which is fully customizable. Try it for yourself and start creating custom bearings using components purchasable directly through Maker's Supply.

Features

Low profile design perfect for display or photos (200mm table pictured)

Only 50mm tall when using the standard 100mm diameter table
- Additional table sizes available: 66mm, 150mm, 200mm
USB powered providing extremely simple operation
- Compact size makes it easily portable when combined with USB power bank
Four second rotational period (15 RPM)
- 15 tooth drive gear, 59 tooth driven gear
Simple assembly, all the required parts can be found in the Marble Run Components Kit 003
- A 10-14mm M2.5 screw can optionally be used to secure the drive gear to the TT motor

Printed Parts

You will need to print these parts to assemble using the Marble Run Components Kit 003:
- RotatingDisplayBase.step [1x]
- RotatingDisplayGear.step [1x]
- RotatingDisplayTable.step [1x]
- MarbleRunBearing.step [1x]
Alternatively if you do not own the Marble Run Components Kit you can purchase 10mm steel bearing balls and a USB TT motor from Maker's Supply (this may be cheaper depending on your region).
- RotatingDisplayBase.step [1x]
- RotatingDisplayGear.step [1x]
- RotatingDisplayTable.step [1x]
- RotatingDisplayBearing.step [1x]

Cross section view of the design which was made using OnShape

Assembly Walkthrough

Community Support

Thank you to everyone who downloads and prints the model. If you would like to support my design work and the development of more educational and fun 3D printed models the easiest way is to simply click the button below and Boost the model for free.

Boost Me (for free)

Click the button to boost!! 🚀

If you would like to support even more you can purchase filament through the official Bambu Labs store using the links in the Bill of Materials.

New to 3D printing or looking for your next print?

Be sure to follow my MakerWorld profile to be notified of new model releases and check out some of my other designs which showcase some of the many possibilities of 3D printing!

Bill of Materials

Maker’s Supply Kits and Parts

Marble Run Components Kit-MH003

MH003

11.00 USD

× 1

Bambu Filaments

Black

A00-K0-1.75-1000-SPLFREE

19.99 USD

× 1

Clear

G01-C0-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (91)

@TheMakerSphere

Boosted

Print Profile

All printed parts (0.20mm, 2 walls, 15% infill)

It is criminal that this is not more popular. The creativity, the printability, the assembly, the functionality... are all phenomenal. Well done. Thanks for sharing with everyone! Printed the marble bearing parts in white PETG Printed the body in white PLA Edit: I forgot to mention, an M2 screw did not fit the motor. I had to use an M2.5 x 10mm to secure the gear to the motor. Maybe the motor's hole size changed?

(Edited)

GIF

The profile uploader has replied

@BrentPeterson

Thank you for the review and sharing your print, it looks great! And another thank you for pointing out the screw size, you're right it should be a M2.5 screw so I fixed the description 😅

@superhenry

Was your PETG bearings tight? Tried with PETG and could barely spin.

@TheMakerSphere

Boosted

Replying to @superhenry :

I don't recall any issues with it being tight. Also, when it is plugged in and turned on, it doesn't seem like it is struggling to spin or anything

@user_2704011557

Printing this now! I've already printed the "Upgraded Bearing," and there's a ring that prints around the inner bearing retention ring (smallest ring.) Does that have a purpose? Everything assembled just fine without it, I can't see where it fits into the assembly, and it's not in the video.

(Edited)

The designer has replied

@BrentPeterson

The small ring is a vertical spacer tool to help with assembly; it's not part of the assembled bearing. The plastic balls from the marble run kit are tall enough to self-align with the bearing grooves but with smaller ball bearings the spacer is needed to to align the balls with the grooves.

@user_2704011557

Replying to @BrentPeterson :

Thanks!

@syyl24

Replying to @BrentPeterson :

This small ring is crucial during assembly

Show original

@IONX35

Thank you very much. At last i have a sensible use case for the kit i received with the A1. The model is very well thought out and easy to print and assemble. I printed in JAYO PLA Black and Clear.

(Edited)

The designer has replied

@BrentPeterson

You're welcome, making a fun yet functional design was one of my main goals so I'm glad you enjoy it! If you have a second to rate the print profile it helps a lot with visibility.

@MJR4PTOR

I am a newbie using bambu lab a1. When printing the center wheel does not rotate and the pieces do not seem to fit well. Any advice to make them fit well?

The designer has replied

@BrentPeterson

Sorry you're having trouble getting the model to fit together. I'm actually working on an improvement to the tabs that hold the bearing since they're a bit prone to snapping if the fit is tight (as you found out). The first thing I'd try is running flow rate calibration on your filament. At the top of Bambu Studio select the "calibration" tab and go through the steps for flow rate calibration (make sure to change build plate). After calibrating flow rate try printing just the bearing pieces and make sure that it is able to spin smoothly like in the assembly video. Once the bearing is working well you can follow the same steps and print the remaining pieces. Let me know if that helps.

(Edited)

@BrentPeterson

@MJR4PTOR I updated the model with a more robust design for the table, try printing the new version and let me know if that works for you.

(Edited)

@Saarsy

Boosted

Print Profile

All printed parts (0.20mm, 2 walls, 15% infill)

useful when needed

@Models.Inc

Print Profile

All printed parts (0.20mm, 2 walls, 15% infill)

so cool!

@m.loidl

Boosted

Print Profile

Upgraded Bearing (10mm steel balls, 10pcs)

Unfortunately, the marbles from the marble run don't fit! They are 13.5mm and I had to order 10mm ones from Amazon

Show original

@m.loidl

Boosted

Print Profile

All printed parts (0.20mm, 2 walls, 15% infill)

The hat works wonderfully!

Show original

@m.loidl

Boosted

Print Profile

Additional Tables (66mm/150mm/200mm)

Top!

@user_779870311

What a brillant design. Works fine with a little adjustment. However do you notice there's dots inside the bearing which make it tought to rotate without polish? Can you fix it?

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License