Mini Spool Adapter for AMS by 3DXLR8R

3DXLR8R

3D Printer>3D Printer Accessories

IP Report

GIF

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

0.2mm layer, 2 walls, 15% infill

Designer

3.7 h

2 plates

4.5(8)

Open in Bambu Studio

Boost

Released

Description

I had some old .5 kg spools of ASO filament from a 3d printing pen that I wanted to use in the AMS. This design works with other spools as well if the inner diameter is the spool 50-52mm and widths varying from 50-83mm. The outer diameter of the adapter is 200mm. Each half takes about 1hour to print on standard settings.

Note: If it comes out super tight, thats OK! Screw the two sides together until it gets REALLY tight, then unscrew all the way, blow out any dust that gets lose. After doing this you will be able to screw it together further than you could before. Repeat until it goes all the way.

Comment & Rating (12)

@BossyNSaucy

Print Profile

0.2mm layer, 2 walls, 15% infill

printed perfect in appearance but I cannot for the life of me get to screw it all the way. I even tried grease and I’ve tried working it back and forth. It fit the rolls I needed perfectly but I needed it to screw together better :-( it was work to get it this far, I don’t see any issues with the threads on either side either.

@user_2399846873

screw together until it gets tight, then unscrew all the way and repeat. there is probably a part of your threads that may have been a bit out of tolerance

(Edited)

@3DMcD

Boosted

Replying to @user_2399846873 :

this worked for me.

@user_2708449094

Print Profile

0.2mm layer, 2 walls, 15% infill

@voltageviv

Print Profile

0.2mm layer, 2 walls, 15% infill

@nvisble

Print Profile

0.2mm layer, 2 walls, 15% infill

Awesome Spool upscalers.

@user_2399846873

Thanks for the review!

@IzzyC2010

Print Profile

0.2mm layer, 2 walls, 15% infill

don’t like how it scratched ams case

@user_2399846873

Did you print it oversized?

@user_256052698

Print Profile

0.2mm layer, 2 walls, 15% infill

apologies. i had the wrong rating.

@caracciolo.dani

Print Profile

0.2mm layer, 2 walls, 15% infill

@hirorkify

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (12)

License

Related Models

Cord Reel

Cable reel for Sunlu spool

Universal spool adapter

Cable reel for sunlu spool V2