Printed from pla mate. Little bit weak on the pistol. But taking into consideration speed of the print its overally looking good. Second picture is painted with airbrush and miniature paints

T-Bjorn

Low Infill, less filament

BackDaws

Awesome print. My daughter enjoyed painting it

Patman134

absolutely perfect print. one of the best I've seen. a1 mini silk pla

zzz101z

0.2mm layer, 2 walls, 20% infill

Kerem Arslan

yeah, they were tuff to get off but completly worth it.

Why did you use support, my friend? You did not remain without support, and what is your printer model?

user_2913392568

Printed in Bambu matte grey at layer height ".16mm optimal settings" on the X1C. No supports used, and the details are very good. Thank you for the excellent model!

Larcen7

0.16mm layer, 2 walls, 20% infill

i got a support error when i tried to print, it saays it needed supports, how did you get awy without?

belfastbiker

I'm new to 3D printing and Mando &amp; Grogu was the third thing I've printed, I'm looking forward to painting it

user_2584052391

tcheslav

Austin1976

0.16mm layer, 2 walls, 5% infill

mircom

jyg4431

Encrust3d

cover

mando grogu.webp

plate_1.png

.16mm layer height, 2 walls, 20% gyroid infill. No supports needed.

Low Infill, less filament, faster print. Same settings as previous profile, less infill to speed up the pprint and use ~30g less filament.

mando.webp

latent

I love this model but the 20% infill and print profile was a bit long and used a lot of filament for my purpose of putting it on my shelf and just looking at it - this profile is .16mm layer height but with 5% infill and a few other tweaks like infill combination to get a print under 4.5 hours and under 90g of plastic.

plate_1.webp

Bummelz

Mando1.webp

Mando2.webp

Mando3.webp

Mando4.webp

Coke2709

Painted Model with 4 ColorsUsed:Bambu PLA Matte Grey for the BaseBambu PLA Metal Iron Gray Metallic for the BodiesBambu PLA Metal Cobalt Blue MetallicBambu PLA Metal Oxide Green Metallic

Multicolor - 4 Colors - 0.16mm layer, 3 walls, 20% infill

PXL_20240424_212100966_ccbf406f-9144-4a1e-b498-5ebe2434a8d0.webp

Adrigarro

I made some adjustments to be printable on A1:0.6mm nozzle&nbsp;0.18mm layer&nbsp;2 walls10% infill (maybe you could put less like 5%)No supports (the geometry does the work)&nbsp;In the photo maybe you san see some issues, that's because I made a timelapse smooth video and I removed the purge tower (don't be like me).There are some strings too so maybe adjust &nbsp;a little your retractions (but it isn't so relevant IMO).

0.6mm nozzle, 0.18mm layer, 2 walls, 10% infill

Mando and Grogu_9e1ecd66-296f-4665-a976-cf87aa17d65e.webp

Megan

0.16mm layer, 3 walls, 20% infill, 5 Colors

3Dennis

Mandalorian Figurine | No Supports

Baby Yoda ( Grogu ) Easy Print

Mandalorian figurine remixed to add Grogu, and still prints without supports needed. For the remix, I increased the base size, combined and added Grogu, added a few crystals to support Grogu's hands, and used meshmixer to mesh the crystals with the base. I printed .16mm layer height with polyterra pla, no supports needed.

Print Profile(7)

Description

Comment & Rating (333)

This remix is based on

License

Related Models

Brick figurine stand, in the shape of a brick man

Tulip Decor Figurine

Owl Decor Figurine

Deadpool Figurine

Mandalorian and Grogu Figurine - no supports