Phone / Camera - Tripod by MakerVerse Designs

MakerVerse Designs

Tools>Gadgets

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

13.2 h

5 plates

4.2(82)

Longer Phone Older for iPhone Pro Max and Other

28 min

1 plate

5.0(3)

Open in Bambu Studio

Boost

313

498

1.2 k

631

Released

Description

A fully 3d-printed tripod for taking stable photos and videos with cell phones or cameras such as GoPro.

Information about printing:

no other external parts are needed, everything is printed
no support is required
the ball joint has in-build support and is printed in place, so it needs to be loosened with a little force after printing

There are several adapters:

for all types of cell phones
- can be used both vertically and horizontally, by loosening the screw you can turn it
for cameras with 1/4"-20 UNC screw
- an adapter for GoPro can be screwed onto this (e.g.: https://makerworld.com/en/models/104493?from=search#profileId-147909 )

For an instructional video check out my instagram:

https://www.instagram.com/reel/C8hWvtUsLBc/

For everyone interested in making a remake, feel free to edit the .step file I uploaded!

Have fun with it and leave a like or subscribe if you like it!

If there are any suggestions for improvement, feel free to write a comment.

Comment & Rating (96)

@Marche

Print Profile

0.2mm layer, 2 walls, 15% infill

Legs don't open that much Also my phone is quite big and it doesn't fit

@PitEasy

Boosted

I created a new print profile to adapt it to large phones

@YngPrntr

Print Profile

0.2mm layer, 2 walls, 15% infill

Great model, i wish the legs would open a bit more, printed in sport mode on my A1Mini just before the event i needed to record.

(Edited)

@vvojta

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Other than the "balljoint part" it printed out nicely, the joint started moving, so it got a slight layer shift, so a may need to print it again using speed modifier for the joint

@adriandr

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Didn’t had any printing issues at all. I believe this tripod has potential. I needed this for a Samsung Galaxy S5 and it’s ok. Here are some suggestions: - iPhone 12 fits ok without the case-because it’s a bit bulky. iPhone 12 pro max does fit, but a taller extender would be perfect. - A version with a rubber band would be nice for a quick fit/remove the phone from the holder. - I used spring washers for stability. Needs a smart approach to help with feet angle adjustment and better stability.

@PitEasy

Boosted

I created a new print profile to adapt it to large phones

@RealNationPrint

Print Profile

0.2mm layer, 2 walls, 15% infill

Holder to small for my iPhone Max pro 15

@PitEasy

Boosted

I created a new print profile to adapt it to large phones

@Judgementz

Print Profile

0.2mm layer, 2 walls, 15% infill

Worth it. Now i can keep my videos leveled lol. Great job.

@PitEasy

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I created a new print profile to adapt it to large phones I like this print but I would have preferred the legs to open more

@sbarba

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2982528533

Print Profile

0.2mm layer, 2 walls, 15% infill

Print easily and without issues. :D To improve the model: - A locking mechanism in the slide system where the phone is mounted. Every time I take out the phone, this part falls on the floor. :) - More grip and movement on the legs.