Project: Ezra.hfp

This was my first Hueforge creation.

I felt the 3d printer world needed more Ezra Bridger. I might do all of Phoenix Squadron over time.

Enjoy.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x169.21mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA+ IIID Max Silver Transmission Distance: 4.3
    PLA+ IIID Max White Transmission Distance: 5.6
    PLA+ IIID Max Space Gray Transmission Distance: 3.6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Silver
    At layer #14 (1.2mm) swap to White
    At layer #22 (1.84mm) swap to Space Gray for the rest.