Right angle keystone patch panel. MANY SIZES

Copyright Claim

Right angle keystone patch panel. MANY SIZES

Boost
33
105
17

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
4.4 h
1 plate
4.9(8)

Open in Bambu Studio
Boost
33
105
17
12
114
81
Released

Description

  • Multiple sizes - one plate has panels with various sizes (from 2 to 9 sockets)
    • parametric design (ask/request in comments for bespke dimensions/patch-panel-size)
    • download the 3mf file and delete the objects which you do not want
    • your print will take less time to print than the prediction (because the single plate contains everything)
  • No support
  • The screw holes work great with M3x16 wood screws but should work with different screws too
  • Tested with P1S 0.4mm nozzle and PLA matte white, however any other combinations of printers/filaments should work just fine (PLA matte is weaker than PLA basic, but still strong enough to give rock solid feeling)

 

 

 

 

Comment & Rating (17)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Superb, significantly cheaper than buying a hub like that! Fits perfectly, thank you
The designer has replied
Show original
1
Reply
thank you :)
0
Reply
Works pretty well, had to insert the RJ45 keystones I was using from the other side because they didn't fit between the ribs, but that wasn't an issue in my application.
The designer has replied
0
Reply
Thank you for the boost and the comment. I could make version with more spacing, mine RJ45 fited there so I was thinking the spacing is good enough, which ones you have? What is dimensions of them?
0
Reply
Replying to @user_882022332 :
https://www.amazon.com/Cable-Matters-25-Pack-Keystone-Punch-Down/dp/B004D5PFGW?th=1 The amazon listing says they're 18mm wide, but not sure if thats just the keystone part or the back section where the punchdowns are. If I remember, I'll put a caliper to em when I get home. Not sure what the standard spacing on keystone patch panels is, but maybe that's something to go off of, then have to add a little space as well to include those ribs.
0
Reply
Replying to @GrumpyTanker :
mine were female to female, so they were thinner, i will try to order them to try to do amendemnts
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Prints without any problems, thank you
The designer has replied
Show original
1
Reply
danke
0
Reply
nice work
The designer has replied
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I wasn't ready for the keystones to be sticking out and not flush against the unit. I saw after the fact that you had a picture that showed that.
The designer has replied
0
Reply
yes that was intentional, you see it from the model as well, the keystone notch is almost in the middle of the keystone and the model is just thin wall to be functional and not waste plastic, sorry for that but i think it was obvious from the photos or even the model itself
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Simple and strong, just what I needed!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply