Differential axle housing for brick models by horcikdesigns

horcikdesigns

Toys & Games>Other Toys & Games

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 3 walls, 15% infill

Designer

1.5 h

1 plate

4.7(3)

0.16mm layer, 3 walls, 15% infill

Designer

1.8 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Works with all Technic differentials that are on the photo above. Might need additional reinforcent liftarm from sides.

Added versions of the central part - longer and assymetric options.
Let me know in the comments whether you need some special version for your project.

Do you want to build realistic axle with this diff. housing? Check this part out:
https://makerworld.com/en/models/515959#profileId-432228

Comment & Rating (11)

@COMarine1371

(P1S) Great desgin. I reccomend printing with a .25 nozzle due to then pin holes are a little loose on the covers with a .4 nozzle. Printed this with Panda Revo .4 diamond back. (basic bambu pla) I printed another one with .25 and all the pin holes are great. (polymaker pro pla), (Panda Revo Diamondback .25), nozzle temp 220 degrees, bed temp 55 degrees. both test used auto tree support.

(Edited)

The designer has replied

@horcikdesigns

Hi, thanks for review. The holes worked well for me, on 0.4 nozzle, but I will try to improve the geometry. For additional reinforcement I suggest to use 3L liftarm on both sides to fix all parts together.

@COMarine1371

Replying to @horcikdesigns :

my temps could have been off due to the nozzle type. i have had to change all my nozzle temps due to the diamondback

@COMarine1371

are you still working on the lockable diff ones?

The designer has replied

@horcikdesigns

Currently not, but they are definitely planned for this year.

@horcikdesigns

You can test this one and let me know what features the lockable should have. ;)

@COMarine1371

i am currenttly testing modification of yours…will take 8hrs. is there a way i can pm you so i can show you what i did and it could possiblly give you an idea/refferance. Dont worry about me posting it as a “remix” it’s your desgin, i just want to help ya out.

(Edited)

@mcfearjnr

Boosted

On my P1S, It printed amazingly and Is such a cool addition for those looking for more realistic lego builds. Not only does it allow for a cool way to hide your diff, But also allows you to grease it or put oil in it for those putting a differential in a lego RC car. Overall 10/10 and I would indeed recommend.