BAMBU LAB AMS RISER

BAMBU LAB AMS RISER

Boost
19
39
8

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 3 walls, 10% infill
0.2mm layer, 3 walls, 10% infill
Designer
1.6 h
1 plate
5.0(5)

Boost
19
39
8
2
43
25
Released

Description

Riser for AMS Bambulab

 

The raiser is only for AMS and not for glass.

The elevators have a very specific position to be mounted in the AMS, in the model file you will find 4 different models, numbered from 1 to 4

I am attaching a photo of the bottom of the AMS where you can see the mounting position of the model with the corresponding number.

In order not to make it slip on the glass, rubber was applied to the bottom of the lift, made but an old mousepad and with double-sided tape.


Documentation (1)

Assembly Guide (1)
tempImagedr4zaJ_24b1cbb5-53e0-4121-82dd-9a64d8461fdd.jpg

Comment & Rating (8)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill
Super great! Exactly what I was looking for! Fits perfectly. Thanks a lot for sharing!
The designer has replied
0
Reply
💪🏼
0
Reply
thank you
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
This is the simplest and most effective AMS accessory (in summer) 👍
0
Reply
Thanks for this it was just what i was after. I increased the height of mine to 140mm so they would raise my AMS by 122mm. They are a loose fit though, i padded mine a bit so they wouldn't fall off when the AMS was picked up.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
No more