Multiple Sized Trays for Build Plate Cleaner by AeonJoey

AeonJoey

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

23 designs in this file

Designer

79.6 h

23 plates

4.9(125)

4 designs for A1 Mini

Designer

6 h

4 plates

5.0(13)

Build Plate Cleaner Trays - A1 Mini

6 h

4 plates

5.0(10)

Open in Bambu Studio

Boost

383

1175

209

1.1 k

674

Released

Description

This is a set of different shaped trays for the fantastic Build Plate Cleaner by K-Studio.ca

There are now 23 versions in this file:

2 Pads 1 Bottle
3 Pads
2 Pads
3 Pads 3 Bottles
2 Pads 2 Bottles Vertical
1 Pad 1 Bottle
1 Pad 1 Bottle 2 Tray
1 Pad 1 Bottle 4 Tray
1 Pad 1 Bottle 3 Tray L-Shaped Left
1 Pad 1 Bottle 2 Tray L Shaped Left
1 Pad 1 Bottle 3 Tray L-Shaped Right
1 Pad 1 Bottle 2 Tray L-Shaped Right
2 Pads 2 Bottles 2 Tray
3 Pads 3 Bottles 3 Tray
1 Pad 1 Bottle 7 Tray
1 Pad 1 Bottle 4 Tray
2 Pads 2 Bottles 5 Tray
2 Pads 2 Bottles 2 Tray Horizontal
2 Tray only
4 Tray only
1 Pad 3 Tray
1 Pad 1 Tray
1 Pad 2 Tray

The bottle spot is 66mm wide, and perfect for alcohol bottles like the one shown in the photos.

Comment & Rating (209)

@mistacole

Boosted

Print Profile

23 designs in this file

I printed the 2 pad version and the second pad houses a standard alcohol bottle pretty well.

(Edited)

@AeonJoey

Oh awesome, thanks so much for the feedback, rating and boost!

@Skol

Print Profile

23 designs in this file

Printed good. Very usefull.

@AeonJoey

Awesome glad to hear it! Thanks for the rating!

@GoudaNate

Print Profile

23 designs in this file

Unless you like IPA all over your table, I would highly reccomend this to hold/organize your build plate cleaner.

@AeonJoey

LOL indeed! Thanks for the pic and rating!

@Yotie

Print Profile

23 designs in this file

printed in Bambu Blue Jean PLA-CF all good! perfectly fits the bottle from Nanovia Print Bed cleaner, my second bottle of this, great stuff!

@AeonJoey

oh rad! good to know, now I have to look this stuff up and buy some lol!

@user_284119949

Print Profile

23 designs in this file

top notch

@AeonJoey

Love the color combo! Thanks for the rating!

@jkisser

Boosted

Print Profile

23 designs in this file

Printed great. I did up the infill to 10% and used Gyroid. I also turned off ironing to save some print time. Great model!

@AeonJoey

Awesome, thanks for the rating!

@Deathbyphone

Boosted

Print Profile

23 designs in this file

Nice design and printed great. It will work great in my setup. I really liked the amount of options you gave. I ended up going with a balanced mix

@AeonJoey

nice! thanks!

@AeonJoey

Thanks so much for the boost! 😀

@PMG_montage

Boosted

I love the design. I’d love to see a version for EU people. 66mm diameter isn’t usual for the bottles u get here. thank you for your nice work

@DieLange_314

you can try this, isnt the same but close to 66mm. I am goign to order it soon and try, but sont see a problem with the size should have .5mm clearance. https://amzn.eu/d/6L84O8J

@BensonSupply

X1C - Bambu PLA Metal Love the design. Same error happened on two prints. Maybe not enough infill on stock profile? Not enough adhesion between layers and it can’t make the bridges. Bed adhesion is great. It is pretty warm in the room but the door on the printer is open. Didn’t happen on any other prints I did today with the same filament. Any advice?

The designer has replied

@AeonJoey

oh darn! so sorry it failed on you. Hmmm I'm thinking since it looks like this is all happening at the same layer as where the ironing is for the flat areas, that the ironing settings are the culprit. The profile is set up with a slight modification (ironing flow 25, the default is 10) but is specifically set up using Bambu PLA Matte filaments which might be why this may be happening. I'd recommend turning off ironing if it's not working well with non-matte filaments - as a maybe. But if you get good results normally, maybe this profile has too many customizations - perhaps try: Try thedefault 0.2mm standard (or turn off everything orange in settings) OR If you haven't already, try running both the 'Flow Dynamics' and 'Flow Rate' calibrations for this filament. Good luck and so sorry this happened!

@BensonSupply

Replying to @AeonJoey :

No worries, we got it sorted. The PLA Metal adhesion maybe a bit different. I have been using the standard PLA profiles for it and its been doing pretty good. Only thing I am noticing is around some parts with through holes, the concentricity is a bit wonky. Thank you so much for the thoughtful design! Also just saw your printer setup on reddit and its giving me inspiration haha.

@superdoedoe

Boosted

Thanks for the cool Print

The designer has replied

@AeonJoey

glad you like it, turned out nice

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License