Sligthly overengineered desk clamp

Copyright Claim

Sligthly overengineered desk clamp

Boost
84
189
22

Print Profile(3)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.16mm layer, 3 walls, 15% infill, PLA
0.16mm layer, 3 walls, 15% infill, PLA
Designer
1.7 h
1 plate
5.0(2)

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
1.9 h
1 plate
4.3(8)

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
1.3 h
1 plate
3.0(2)

Boost
84
189
22
2
237
135
Released

Description

UPDATE 2024/05/31: Added an improved version of the screw and insert for a better fitment of the threads, also .3mf files

--------------------------------------------------------------------------------------------------------------------------------------------------

Print Instructions:

 

Everything can be printed in place without supports with at least 10% infill. PLA works well, for more strength print with at least 3 walls. Just take care of the M14 thread insert and the screw by using 0.12 or 0.16 resolution and maybe a lower printing speed to make both parts fit perfectly.

 

Assembling:

  1. Push the insert into the clamp body.
  2. Put the screw in and test its functionality.
  3. Mount the stopper on the screw
  4. Place the whole clamp on your desk

Enjoy!

Comment & Rating (22)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 3 walls, 15% infill
it just doesn’t do its job
The designer has replied
1
Reply
You forgot a little piece
(Edited)
1
Reply
Please open the profile and check if you have print all the pieces
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
need to cut back the 1st threads on the shaft to get it to feed into the holder after that it works good.
0
Reply
Looks great! Thank you for printing! Yeah you are right, if the quality of the printer is not good enough or the speed was too high, the screw will barely fit because of the tight M14 fitment.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Klein aber fein.
1
Reply
Danke für die Rückmeldung :)
0
Reply
I had a bit of trouble with the screw. I scaled it down a little and forced the first 3 threads. After that, everything fit perfectly. Overall, I find it quite well-designed.
(Edited)
1
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill, PLA
The thread is a little bit tight but it works fine :) Realy useful.
1
Reply
Boosted
Print Profile
0.16mm layer, 3 walls, 15% infill, PLA
easy and quick print
1
Reply
Really bad 3D model, thread just does not fit... already wasted material on your bad model. Dont print this. There are much better models - that you print from profile and fits perfect. "Sligthly overengineered", meh...
The designer has replied
0
Reply
Sad to hear that your print doesn't work... I just uploaded an improved version of the screw and the insert for a better fitment. If you want, just try out and let me know!
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
decent
1
Reply
无法工作
1
Reply