Small desiccant bead canisters by bovineblitz

bovineblitz

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

3 h

3 plates

4.8(319)

0.16mm layer, 2 walls, 15% infill

3.2 h

3 plates

4.8(42)

0.16mm layer, 2 walls, 15% infill

2.3 h

2 plates

5.0(8)

Open in Bambu Studio

Boost

451

1218

412

343

3 k

2.1 k

Released

Description

I wanted some small, easy, efficient, and nice looking desiccant containers to throw into my filament bags. The ones that fit into the center of spools looked appealing but that's a pretty large space, and I didn't want to use a ton of beads for each roll or leave a large container mostly empty. These fit the bill perfectly and are small enough that they don't get in the way. The lid screws on and off easily but holds firm. The canisters and lids print well without any special settings, 0.16mm layer height is recommended so the threads work well.

The smaller one will hold about 13g of orange desiccant beads, and the larger fits ~23g.

I included a funnel in the file as well in case you find it handy.

Boost Me (for free)

If you like the design please throw a boost this way!

Comment & Rating (412)

@Hwangers

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed great, works great, holds just enough to chuck inside vacuum bags. Make sure you use settings/filament you know won't string. All the tiny gaps will make it a nightmare and the thin walls means using a heat gun will instantly deform it.

@tadghostal

Boosted

Perfect print. Lid screws in smoothly. I like that it doesn't use more filament than needed.

@tobyspitalnick

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

very clean profile and print.

@haxaub

This is my favorite little dessicant container! I have printed a bunch of them. (PEGT on a P1P). The print turns out very nice. I use them for dessicant and I use some to fill with dried lavender buds and put them all over the house, closets, laundry baskets, etc.

(Edited)

@user_4266141409

Print Profile

0.16mm layer, 2 walls, 15% infill

super

@user_1719893486

Print Profile

0.16mm layer, 2 walls, 15% infill

super easy to print and it came out great

@user_776881493

Print Profile

0.16mm layer, 2 walls, 15% infill

I’ve printed both sizes and they both fit in my cereal canisters nicely. thanks!

@Rutchard

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

I needed some small desiccant holders, and these are perfect. Printed out a pair of the small ones to start. Then another plate of 10! Should be set for a bit.

@user_4270555512

Boosted

Runs small, yet proves exceptionally practical

Show original

@user_1922182781

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

very nice! threads on cap fits perfectly

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.