Tips for printing:

• Supports: Yes (tree)
• Layer height: 0.16mm (optimal)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: No
• Brim: Yes

Colors and filament I used (5 Color Version):

• PLA / White - for the teeth and eye
• PLA / Black - for the eye
• PLA / Green - for the body
• PLA / LightGreen - for the belly
• PLA / MarmorGrey - for the egg

You can print it in 4 colors too if you like! Here the (4 Color Version):

• PLA / White - for the teeth and eye
• PLA / Black - for the eye
• PLA / Green - for the body
• PLA / MarmorGrey - for the egg

You can print it in 3 colors too if you like! Here the (3 Color Version):

• PLA / White - for the teeth, eye and egg
• PLA / Black - for the eye
• PLA / Green - for the body

Or decide for yourself which colors and how many you want to use!

The Supports under the arms are a little bit hard to break off so please be careful!

When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

Happy printing!