QuickCheck Calipers by Kbfly

Kbfly

Tools>Measure Tools

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

V2 0.4mm Nozzle 0.2mm layer, 3 walls, 10% infill

Designer

28 min

1 plate

4.8(25)

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Designer

1.9 h

1 plate

4.5(22)

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill - A1 mini

1.9 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

185

353

614

369

Released

Description

Introducing QuickCheck Calipers – your handy tool for nailing measurements on the fly! Small enough to stash in your pocket, these bad boys deliver quick and accurate readings in a snap. And get this – they're printed with an ultra-tiny 0.2mm nozzle, but still whip up in just two hours! 30mins! if u use .4mm nozzle. Whether you're tinkering in the garage or tackling DIY projects, QuickCheck Calipers got your back for hassle-free precision, anytime, anywhere.

added V2 has some small tweaks for printing with .4mm nozzle and larger layer heights.

caliper flipped and printed with numbers facing up.

Raised the dashes and numbers,

Enlarged numbers to make printing easier with normal nozzle.

Use Classic wall generator instead of Arachne for the numbers to print correctly.

Add ironing to all top layers.

Comment & Rating (59)

@3DMLHA

Boosted

Print Profile

V2 0.4mm Nozzle 0.2mm layer, 3 walls, 10% infill

Great, easy <30-min print! Accurate enough for a quick measure!

(Edited)

The designer has replied

@Kbfly

looks great! ty for the pic

@chunkahoy

Print Profile

V2 0.4mm Nozzle 0.2mm layer, 3 walls, 10% infill

useful

The designer has replied

@Kbfly

super clean well done!

@Dudeman80083

Boosted

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

this works great dirt cheap for a caliper love it thank you for this amazing design Worthwhile print

The designer has replied

@Kbfly

Great to hear. Print looks great ☺️

@mosutech

Print Profile

V2 0.4mm Nozzle 0.2mm layer, 3 walls, 10% infill

works but ...

@user_1486581421

Print Profile

V2 0.4mm Nozzle 0.2mm layer, 3 walls, 10% infill

Super helpful, and great design!

@biscuitless

Print Profile

V2 0.4mm Nozzle 0.2mm layer, 3 walls, 10% infill

My daughter kept stealing my calipers, so I needed to make one just for her! The print was very good. Even with a 0.4mm nozzle, the numbers are easy to see. The slide mechanism was a little tight at the beginning, but after working it, it became easier

@cbht3d

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

good quality print, but when the calipers are closed, the measurement starts at about 0.5mm instead of 0mm. still useful! you just have to remember to subtract 0.5mm for exact measurement.