Plastic Buckle (Zero supports)
Copyright Claim
Plastic Buckle (Zero supports)
Boost
377
694
70
Print Profile(4)
![[2Color 1Swap]: 0.2mm layer, 3 walls, 100% infill](https://makerworld.bblmw.com/makerworld/model/USfd9e668a5a4b93/76608109/instance/2024-05-08_3ec20586b0674.jpg?x-oss-process=image/resize,w_100/format,webp)
[2Color 1Swap]: 0.2mm layer, 3 walls, 100% infill
42 min
1 plate
☆PETG Quality☆ 0.2mm layer, 3 walls, 25% infill
50 min
1 plate
Faster & Stronger 0.24mm layer, 6 walls, 30% infill, A1 mini
32 min
1 plate
![[A1 Mini] 0.2mm layer, 3 walls, 25% gyroid infill](https://makerworld.bblmw.com/makerworld/model/USfd9e668a5a4b93/76353534/instance/2024-05-11_a315c3c994aed.jpeg?x-oss-process=image/resize,w_100/format,webp)
[A1 Mini] 0.2mm layer, 3 walls, 25% gyroid infill
36 min
1 plate
Open in Bambu Studio
Boost
377
694
70
24
702
436
Released
Description
Get the v2 here:
https://makerworld.com/en/models/828572
Plastic Buckle design with the FDM 3d printing method in mind: 1. No support needed 2. Prints in only 30 minutes.
This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind:
No support is needed
Prints in only 30 minutes
Optimized print orientation for strength
Designed to counter possible elephants's foot
The outside dimensions of the model can be seen in the picture below
The holes are 6mm x 11mm
Boost Me (for free)
If you like my work I would be honored to receive a boost from you
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (70)