If you print this please post a photo of your print. Thanks
I didn't have orange so I used a translucent red.
IMPORTANT >>> Ignore the floating region warning!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 147.25x160mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.04mm and the Actual Depth is 2.04mm
Filaments Used:
PETG Creality Black Transmission Distance:
PETG Tpoimns Gray Transmission Distance:
PETG Creality White Transmission Distance:
PETG BambuLab Basic Orange Transmission Distance:
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.64mm) swap to Gray
At layer #11 (0.96mm) swap to White
At layer #17 (0.96mm) swap to Orange for the rest.
Comment & Rating (0)