A1 mini toolhead Window Button


Print Profile(2)

Ver2.0, 0.2mm layer, 2 walls, 15% infill
Ver2.0, 0.2mm layer, 2 walls, 15% infill
Designer
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A11.4 h
4.0
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
X1 Carbon, P1S, P1P, X1, X1E, A112 min
5.0

83
160
46
320
153
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

UPDATE 28 OCT 2023

Thank you for the feedback, I have updated the design to version 2. This has better tolerance and should fit better. If you want to try your hand to add your own logo, try using the updated blank.

INTRODUCTION

Customize your window button. Fast, easy to print and multi-colour. There are currently 3 design options. In addition, I have uploaded a step file of the blank version. So you can try adding your preferred image. Do remember to credit me when using the blank.

  1. Pokemon Ball
  2. Deadpool
  3. Naruto Madara

Will add more when I have time to design them.

 

Below is what the blank looks like. I have uploaded the STEP file (A1 Window Button Blank v2.step). Do print it out to test it on your A1mini before you start adding your design to it. I would advise the design to be at least 0.6mm thick. That means 3 layers (assuming u are using 0.2mm layer height).

 

 

 



To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like my designs and wish to contribute to my coffee addiction & help fund the filaments and materials needed for prototyping, a donation of $5-$10 to Ko-fi or paypal.me will be greatly appreciated.

 

CAVEAT

As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.

 


License

Comment & Rating (46)

Please fill in your opinion
0/5000

Print Profile
Ver2.0, 0.2mm layer, 2 walls, 15% infill
very nice 👍
1
Reply
printed both sizes both are too large and don’t fit
The designer has replied
0
Reply
hmmm. I got my A1 mini at the same time as content creators. Let me double-check again with the others who got their machine from regular production. thanks for the feedback.
0
Reply
Replying to @thrutheframe :
this is mine
0
Reply
Replying to @DanUnderwood :
Thanks for the photo. That is a lot smaller than what I have. Mine was around 3.65mm. After checking with others on discord, The pre-production version of A1 (mine version) does have a larger diameter. I have created a 3mf version with 3.45mm diameter. Do try it out to see if it works.
(Edited)
1
Reply
It doesn't fit. The hole is too big. IT needs to be scaled down.
(Edited)
The designer has replied
1
Reply
Thanks for the feedback. Due to variations of filament from different brands, I made a version with smaller holes. U can use the 3_6mm version with a smaller hole diameter.
0
Reply
Replying to @thrutheframe :
Hey mate, thanks for mod the hole but still too big. Do you even have an A1?
0
Reply
was this designed on pre release A1? I printed both sizes and way too large diameter hole versus A1 pin size. The hole size on the stock window button I have is 3.5mm.
0
Reply
Print Profile
Ver2.0, 0.2mm layer, 2 walls, 15% infill
Printed according to the settings and everything is ok, A1 mini
0
Reply
Print Profile
Ver2.0, 0.2mm layer, 2 walls, 15% infill
Pops off the shaft all the time, needed to manually/mechanically alter the hole to get it to stay there print came out nice tho
(Edited)
0
Reply
Print Profile
Ver2.0, 0.2mm layer, 2 walls, 15% infill
Love the design - but it’s a bit loose
0
Reply
Print Profile
Ver2.0, 0.2mm layer, 2 walls, 15% infill
Little Loose on the Fitting and falls off from time to time.
0
Reply
Print Profile
Ver2.0, 0.2mm layer, 2 walls, 15% infill
It works great!
0
Reply
Print Profile
Ver2.0, 0.2mm layer, 2 walls, 15% infill
i love the design
0
Reply
too thick to use with cover
0
Reply