Mini Hexo Display Case by Daniele

Daniele

Household>Decor

IP Report

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

Mini Hexo Shelf

Designer

7.7 h

7 plates

4.9(79)

Mini Hexo Shelf – A1 mini

Designer

8.5 h

7 plates

4.9(16)

0.2mm layer, 2 walls, 15% infill

3.4 h

3 plates

5.0(6)

0.2mm layer, 2 walls, 15% infill

9 h

4 plates

5.0(2)

Click to see more

Open in Bambu Studio

Boost

1085

2141

230

172

1.7 k

682

Released

Description

I know there are plenty of honeycomb shelves around, but I couldn't find one like the one I had in my mind.

I wanted something that I could expand without making new holes, and no visible screws!

The ones in the pictures is held by just two nails, and it can be expanded even further!

Mini Hexo Shelf dimensions:

Mini Hexo Shelf – Available Depth Sizes:

3.5 cm
4.5 cm
5.5 cm

Combine it with the different sizes:

Check out all the options:

Hexo Display Case Collection

How to assemble it:

Membership

Welcome to my Hexo Display Case Models Collection! These original 3D models are designed for creating stunning display cases for your collectibles. By subscribing to the Commercial Printing License, you gain the right to sell physical prints of these models. New models will be added over time, so stay tuned! Please ensure you credit me when selling your prints. For inquiries or support, feel free to reach out. Thank you for your interest!

Join

Boost Me (for free)

If you love my models and want to support the creation of new, exciting pieces, or if you simply have a Boost to spare, I would greatly appreciate it! Thank you so much for checking out my model!

honeycom shelf hex shelf

Comment & Rating (230)

@user_3689526445

Boosted

Hi Daniele! I love the stackable design as I don’t want to nail every shelf and make a bunch of holes in the wall. My only question is, if I wanted to scale this one or the “standard” one to something bigger, how do I go on about the adapters? I want smaller ones and bigger ones but I’m very fresh to 3D printing. Your help is much appreciated! ❤️

The designer has replied

@Tribio

Thanks for the support! It's very appreciated! If you need to scale the standard shelf, you need to scale also the adapters and the mini ones, but the risk is that the locking system won't be so tight anymore. I guess up to 10% should be fine, but it's just a guess... how big do you need it to bie?

(Edited)

@user_3689526445

Boosted

Replying to @Tribio :

I think I'd need it to be around 20-22cm in height max. But I could also definitely go for the standard size with an "open roof" if that makes sense. Something like this one https://makerworld.com/en/models/60775?from=search#profileId-62973 The most important aspect is they maintain your stackable functionality.

@Tribio

Replying to @user_3689526445 :

That's quite large! I wouldn’t recommend increasing the size that much, but you can always give it a try. Just keep in mind that there’s a risk of wasting a lot of filament!I was considering adding something like that, but would it work to simply place the model directly on top of the shelf? I'm also working on additional pieces to make the top wider and flatter, allowing it to support longer models when laid down. I hope that makes sense!

@MrSalum

Boosted

Amazing work. I finally managed to give my funkos a home. Thank you very much.

The designer has replied

@Tribio

Nice collection! Thanks for sharing the picture and for all the boosts!🤩😍

(Edited)

@user_2582458880

Boosted

love them. Easy to put together and expand.

The designer has replied

@Tribio

Thank you!!!

@user_2582458880

Boosted

Replying to @Tribio :

suggestion, a template piece that I can screw and lineup the anchors would be great. Sort of like a print that is only .25 inches tall and open in the middle so I can screw through it and then pull off and put the piece on it. Not sure if that makes sense.

@Tribio

Replying to @user_2582458880 :

The template should hold two anchors (hooks) in plase so they can be aligned, right? Good idea!

@kenbroman

Boosted

Print Profile

Mini Hexo Shelf

I printed out a bunch of these for my daughters rock collection. this might be one of my favorite things I’ve printed so far. I’d love to see a medium size that I could use for my vinyl figures that are a bit too big for the small size.

@Tribio

I was working on a medium size, but unfortunately, it didn’t fit as nicely as I hoped. I have other ideas in mind, so I’ll be releasing more pieces soon! Thanks for the boost!

@timc1977

Boosted

Very happy with the display. Sized up 135%.

The designer has replied

@Tribio

Wow 😳! how many nails or screws did you use?

@timc1977

Boosted

Replying to @Tribio :

6 screws in studs. 4 screws in drywall. A few random nails.

@Tribio

Replying to @timc1977 :

That will be pretty solid! It makes sense, many glasses, so better safe than sorry! btw, nice collection!

@Bananenbusch

Print Profile

Mini Hexo Shelf

looks great! printed some bigger and smaler ones!

@user_2609092632

how do you print the larger version? did you have to scale it or was it one of his options?

@Tribio

Replying to @user_2609092632 :

I think it was the "Standard one", the one in the picture at least, otherwise if you scale it up, the adapters won't work. Going to release an even bigger version soon!

@user_226880248

Boosted

worked well for challenge coins

The designer has replied

@Tribio

Wow! Amazing collection 👏

@scrambledgreyma

Boosted

I scaled it up to 300% for my Lego helmets. there were a few hiccups, but ultimately I’m happy with the results.

The designer has replied

@Tribio

Thanks for the boost! Happy to hear that up to 300% still works!

@argon31

Boosted

I really like your design! It is very nice that the lock is hidden so that you can combine different colors and still keep the hexagon shapes! I printed them a little less deep (23 mm) and added two Lego studs so they can be used to store/display my son’s Lego mini figures. He really enjoy being able to quickly find the figures he wants to play with and I enjoy the added colors 😊

(Edited)

The designer has replied

@Tribio

😲 wow, thanks for sharing the picture s, it looks awesome!! I'm glad you like it, thanks for the boost! Clever adaptation for the Lego figures.

(Edited)

@Kosh5

Boosted

Amazing work. My daughter LOVES it! BOOST 🤘

The designer has replied

@Tribio

Thank youuuuu! 😊

@Kosh5

Boosted

Replying to @Tribio :

You are more than welcome 🤗

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License