Cockpit Phone Holder Clip v2 by RealNationPrint

RealNationPrint

Hobby & DIY>Vehicles

IP Report

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

PETG 1 Color 0.2mm layer, 2 walls, 15% infill

Designer

56 min

1 plate

4.8(108)

Multicolor 0.2mm layer, 2 walls, 15% infill

Designer

58 min

1 plate

4.7(39)

A1 Multicolor 0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.7(23)

A1 Mini 1Color 0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.7(29)

Click to see more

Open in Bambu Studio

Boost

619

1267

226

134

2.4 k

2 k

Released

Description

Cockpit Phone Holder Clip v2

Version 3 HERE
https://makerworld.com/en/models/1158094-ultimativ-desk-cockpit-phone-holder-clip-v3#profileId-1163595

An innovative 3D print that revolutionizes the way mobile phones are used in cars is the new mobile phone clip for the car cockpit. This unique accessory is specifically designed to securely and stably hold a wide range of mobile phone models and can be effortlessly attached to the dashboard or ventilation slots of the vehicle. Utilizing advanced 3D printing technologies, the clip is not only robust and durable but also light and compact, making it perfect for mobile use. Its innovative design allows for quick and easy attachment of the mobile phone, enabling the driver to use the device for navigation, hands-free calls, or entertainment without compromising safety. Furthermore, thanks to its flexibility and adaptability, the clip can easily be adjusted to fit different vehicle types and mobile phone models, making it an indispensable accessory for modern drivers.

Please note that for midsummer, it's advisable to print the holders with PETG, or even better, with ABS or ASA.

Visit my other Model
https://makerworld.com/en/@RealNationPrint

I'd appreciate a like/follow or Boost and further support! Thank you

Wanna buy me a coffee for my good work? https://www.paypal.me/Realmascha

Comment & Rating (226)

@user_919771395

Print Profile

A1 Mini 1Color 0.2mm layer, 2 walls, 15% infill

PLA - mal checken wie lange es im Auto überlebt.

@Eddyspagedy

And, did it survive?

Show original

@digigibbs

Print Profile

A1 Multicolor 0.2mm layer, 2 walls, 15% infill

Works great! Definitely tighter than the previous version.

@kylequinn1992

Nice and solid, works great for my desk. I printed using PETG, going to give it a try in my Ram 1500 Truck.

The designer has replied

@RealNationPrint

awesome :) wanna see it in your Truck.

@dbq5anlxj

Print Profile

PETG 1 Color 0.2mm layer, 2 walls, 15% infill

nice

(Edited)

@Dismodeus

Boosted

Print Profile

PETG 1 Color 0.2mm layer, 2 walls, 15% infill

Excellent print, functional model tested on iPhone 14 Pro Max with a quad lock case (quite thick), no case, and a minimalistic case. all working perfectly with no stretching issue. Translucent PETG, 75°C bed and 270°C nozzle,

@JaMTasH

Print Profile

PETG 1 Color 0.2mm layer, 2 walls, 15% infill

Smooth printing, good design. It opens enough to hold the S24 ultra with the Spigen case. I haven't tried the stability in the vehicle yet. Thanks for the design and sharing.

@RealNationPrint

Yea the Stability is upgraded. Version 1 Had some Problem with it. Its now smarter / shorter / better!

@babass1664

Print Profile

Multicolor 0.2mm layer, 2 walls, 15% infill

Nice

@VICLER

Print Profile

PETG 1 Color 0.2mm layer, 2 walls, 15% infill

wall thickness could be optimized to be more consistent, but overall ok edit: does not work at all on honda accord.. The holder just slides out and does not hold. Holding on ventilation slots also not possible.

(Edited)

@clnr_794

Print Profile

PETG 1 Color 0.2mm layer, 2 walls, 15% infill

Great print file and nice model, thank you.

@Osogrunyon

Print Profile

Multicolor 0.2mm layer, 2 walls, 15% infill

I printed the first one, blue/orange, in ABS. It regularly gets over 100 degrees here and I wanted one that would hold up to the heat. It broke as soon as I tried to flex it. The next two, blue/yellow, were printed in Bambu PETG that I dried for 6 hours in my Sunlu before printing. There is a weird defect on one of the flex points that I highlighted with a box in the image. I am curious to see how they hold up in the car. Anyway, thank you for an interesting design.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License