Milwaukee M18 Fuel Tool & Battery Mounts by IndomReps

IndomReps

Tools>Organizers

IP Report

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

0.2mm layer, 5 walls, 20% infill

Designer

19.3 h

5 plates

4.9(512)

0.2mm layer, 3 walls, 20% infill

4 h

2 plates

4.9(97)

PLA 0.20mm

2.9 h

1 plate

4.9(53)

0.2mm layer, 5 walls, 20% infill

4.7 h

1 plate

4.8(62)

Click to see more

Open in Bambu Studio

Boost

1570

3799

838

738

7.4 k

6.1 k

Released

Description

Milwaukee M18 Tool and Battery Mounts

*** Update 1 - 10/28/2023 ***

Revised tolerances of model so that fit is a little bit looser and releases from the battery a lot smoother.
Revised thickness of batteries mounting face so that the larger High Output batteries can be mounted flush to a surface without the battery interfering with the mounting surface.

Tool mount will work with most tool types, intended to be underhung mount but can be side mounted if it suites a certain tool. The battery mounts will work with any M18 battery and can me mounted in any orientation as it uses the batteries locking mechanism to hold it into place. Use 2 #8 screws to attach them to whatever you want.

I've printed these out of PLA and Pro PLA with no issues with strength but might want to use PETG or ABS if you want to use these in something like a work truck or other environment that might get really hot in warm weather.

Comment & Rating (838)

@LaroucheDesign

Print Profile

0.2mm layer, 5 walls, 20% infill

good print for the batery rack but a major problem for the tool rack cause the hook on every of my drill make it impossible to clip so i had to shim every one of them …

(Edited)

@user_920894711

yeah I just removed mine. I never use it anyways

@user_3410651415

The print profile is no longer public

Very good. The other print was too tight for aftermarket radio, this one is perfect.

@4Kentin

very good thing to make :=)

@christie_christ

Great print in Petg however will not work on my m18 batteries. the holder only has on grove and my batteries have 2 bump outs you can see this in the pictures. so it stops my batteries from going in.