This case is for Bruce is PCB tray mounted using 4x m2x5 standoffs, and needs 8x m2x4 screws to attach the standoffs to the case and PCB.

PCB is available below:

Bruce the Keyboard the PCB
 

This case was designed for PLA filament and is designed to print in 2 parts, a Top and Bottom.

This case requires no supports and the halves connect with 6x self tapping m2x6 screws. Normal machine screws work too.

McMaster-Carr

An internal pocket for weights was added as well.

Weights are available here:

ACCRETION 96Pcs 1/4 Oz Black Adhesive Backed Wheel Weights (24 Oz Pack)

Depending on your printer settings, the self tapping screw hole sizes may need to be adjusted. All screw sizes are setup as custom parameters and can be updated easy in Fusion360.

Feel free to mod this case or use as is for your personal use. Remixes are cool but please don't use this design or remixes for commercial purposes without permission from me.

If you found these files helpful and would like to support me you can support me here.