PTFE / Cable Clips (A1 Mini) by DISLEIK.design

DISLEIK.design

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

Designer

22 min

1 plate

5.0(55)

0.16mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

5.0(10)

Open in Bambu Studio

Boost

179

432

322

Released

Description

Cable management enthusiasts, THIS one's for you!

Tired of your Extruder-cable & PTFE-tubing going separate ways?

Here's a quick and easy solution.

*(2) Clips work just fine but (4) look waaaay better =)

** I recommend the PTFE-tubing to go behind the Cable - I looks cleaner IMO.

¡¡Attention!!

The clips have different-sized openings! The smaller one is for the PTFE-tubing.

As the difference is minimal and might not be obvious for everyone - I placed the smaller opening on the left hand side of the build-plate.

Mark them before removing, remember, measure or try to spot the difference. But in case you mount them the other way around..

no worries.. they will fit as well - just not as intended ^^

Comment & Rating (91)

@SimplyElectr0

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Perfect!

@DISLEIK

Hey there, I’m deeply sorry I didn’t provide an A1M print profile. I seem to have totally missed that when uploading and will update asap. Despite that, I would have appreciated to let me know before giving such a low rating, as this oversight was not intentional. If the low rating is related to the clips detaching, please ensure you do not install them too low. You can use my pictures as reference. Thank you Edit: Just added an A1M print-profile

(Edited)

@SimplyElectr0

Boosted

just updated my rating, sorry for not letting you know first!

@DISLEIK

Replying to @SimplyElectr0 :

Thank you so much for the update :D I didn't know this was even possible... Much appreciated SimplyElectr0!! Edit: Strange... yesterday the rating was changed to 5, now its back to where it was.

(Edited)

@LucMeister

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

Works great, thanks for this simple and practical print :)

@DISLEIK

Nice! :D Thank you so much for giving feedback and uploading a picture 👌

@Inigo

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

Working fine, thank you.

@DISLEIK

Thx for sharing!! looks goooood! :D

@m4n0wut

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

fits perfect

@DISLEIK

Nice!! Thank you so much for providing feedback :D

@Augustus

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

prints great, works well

@DISLEIK

Thx a lot for the feedback and I'm glad you like it :)

@MoKthe1

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

hatt super funktioniert 👍🏼

@DISLEIK

Nice!! :D

@user_828289963

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

Holds the cable and the Tube perfectly

@DISLEIK

Nice! 👌🏼 For a cleaner look, now that you have the clips, you don’t need those springy looking zigzag cable supports as the cable will support itself thx to the PTFE tube. 😁

@rainco1969

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

Does just what they are supposed to- no changes to settings

@q_hey

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

good item

@FireAndIron86

Print Profile

0.16mm layer, 2 walls, 15% infill (A1M print-profile)

Excellent!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.