Collapsible Katana - Revoluted V2 / 活拆式伸缩刀 V2 by niltsh

niltsh

Toys & Games>Construction Sets

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 4 walls, 15% infill

Designer

7.2 h

4 plates

4.8(111)

For BambuStudio 1.9 or greater

7.2 h

3 plates

4.8(46)

90% Scale, 0.2mm layer, 4 walls, 15% infill Works for A1Mini

10.3 h

5 plates

4.6(15)

Open in Bambu Studio

Boost

753

1376

267

227

2.8 k

1.3 k

Released

Description

This is the updated version of https://makerworld.com/zh/models/39368#profileId-38480

I am really glad that there are many guys like this collapsible katana, and I do appreciate your suggestions and opinions.

So I found some time and made a new one, addressing the following issues in the old one.

The strength of the handle-guard connector. This time I combined the handle and connector together to enforce the strength.
The decoration on the handle is better to be multi colorred. So I made a new structure with the outer shell and inner shell to form the handle. With different colors of the shell, the handle now looks more real.
The blade guide is thicken so should not be easy to break now.
the disassemble structure are located at the tail now. And now only two pieces of filament could lock it.

Some important suggestion and notes

When printing the slide lock, I suggest to use the Cool/Smooth Plate. As when using Textured Plate, the thickness of slider sole is a little bit thicker than it should be, it might cause hard to slide.
Still need to use a little bit instant glue for the handle and guard, do not apply too much as it might glue the slider too. Don's ask why I know it :)
The holes to lock the tail and handle are printed without any support, so it might not be perfect. This might cause the filament hard to insert. I suggest to use a Hex Key 1.5 to clear the holes first.
The folding diameter of the rubber ring is 60 mm.
This time, the handle is printed with Support, and I have tuned it many times to perfect the rhombic holes. BUT it is still not perfect.

If some one has better ideas, please let me know, or update your configuration here.

Comment & Rating (267)

@banana_banana

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

very cool , my dog is now in dark souls

@3DBOYZ

what a good boy

@qprints

bark souls

@user_4056688073

that dogo wields too much power

@Kerlt

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

I did a 90% scale of it and added a profile for a1 mini users, works pretty good

(Edited)

@ThatBurga

how do I assemble the pieces? can you reply with some picture or guide maybe?

@Kerlt

Boosted

you can check the designs step by step

@Kerlt

Boosted

Replying to @ThatBurga :

I can’t make you a guide because mine are already assembled it

@pglaum

Print does not work. After trying to print the inside handle 5 times i gave up. Then on the other X1-C the i had the outer part of the grip being printed, you cannot remove the supports, and then when it prints the "Supports" dont break away, they infact rip the actual handle to pices. I will not be printing this again.

@TLE_Henry

Boosted

for me it printed great and support was good the remove

@user_3907694494

It took me three tries to get the inner handle to print correctly. First two were big spaghetti messes at various stages of printing.

@Allen.Andrew

Replying to @user_3907694494 :

Try low-speed printing for taller parts, or orient the piece horizontally

Show original

@Bizzare_Plastic

Print Profile

0.2mm layer, 4 walls, 15% infill

Really cool!!! so detailed with the locking mechanism at the end of the handle using a filament. but the fourth blade won't come out, I need to force pull it... and I need to superglue between the handle and the locking mechanism. Either way its still very nice 🤩

(Edited)

The designer has replied

@niltsh

the forth one? do you mean the blade tip, or bottom. just in case, please check whether the brim is cleared completely.

@niltsh

o I see the photo

@Bizzare_Plastic

Replying to @niltsh :

yes, The bottom one, but It's okay, still love the design and effort👍

@alexandrutasica

Boosted

Very cool sword! I love the button mechanism that allows to carry the sword collapsed when travelling. My GF will definitely use it for her cosplays. As I did not have good rubber bands, I've designed a printable spring mechanism for the button. Needed to make the button a little smaller to not rub with the hand guard. With your permission, I've uploaded (only) the spring button to a model, so people can use it too: https://makerworld.com/en/models/707259

@user_1188918681

I printed all five plates and was wondering what the 5th plate was for

@Rene3D

Print Profile

0.2mm layer, 4 walls, 15% infill

Hat alles gut geklappt. Habe nur die Klinge im Vasenmodus gedruckt.

@TLE_Henry

Boosted

ist die klinge trotzdem stabil genug? überlege sie auch im vasenmodus zu drucken...bekomme aber leider nur ein klingen teil auf die Platte dann

@TLE_Henry

Boosted

Replying to @TLE_Henry :

und lässt sich deine klinge dann trotzdem problemlos ein uns ausfahren und bleibt auch ausgefahren?

@Rene3D

Habe jede Klinge einzeln gedruckt und es klappt alles.

@dryfiredude

Boosted

Hey! I remixed the hilt to have a round version. I think it looks pretty cool and would love to share it with others so there are more options to configure. do you want me to send you the files? I thought about posting it as a profile here, with maker points going to you. Does that seem okay? The model is listed with a standard digital license that doesn’t allow remixes.

@dryfiredude

Boosted

side by side with the other one. I also remixed the scabbard to fit this new version, but it isn’t as clean as the original.

@kstudioca

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

Amazing model, I’ll upload a new profile base on Bambu Studio 1.9.x for seamless print and fix one of the end sword butt print orientation.

@Crome

Print Profile

0.2mm layer, 4 walls, 15% infill

Excellent design, ended up using the spring button instead though cause I couldn't find a rubber band that would work, they paired perfectly with the Deadpool gun for halloween, Thank you!

@user_1943911511

my work: https://youtube.com/shorts/eOzaHqXjvCs https://maker3dprint.com/3d-printed-collapsible-katana-revoluted-v2/

@user_4069589214

your button doesn't work

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.