Ergonomic Lid Handle for Bambu Lab X/P-Series by Jonas Daehnert

Jonas Daehnert

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

26 min

1 plate

5.0(12)

Open in Bambu Studio

Boost

Released

Description

An ergonomic handle for the top glass panel of the Bambu Lab X1C and P1S, which allows safer handling.

About the Handle:

Who doesn't know this? The cover glass plate of the Bambu Lab X1C/P1S looks great and the handle is stylish. But as soon as the plate has to be removed, the unsafe handling becomes apparent.

The ergonomic handle should allow safer handling, especially for people with large hands or physical limitations. It's possible to remove the panel completely using the ergonomic handle without leaving fingerprints on the glass. The standard handle doesn't need to be removed, but it serves as a holder for the ergonomic handle. With the help of an attachable adapter, the ergonomic handle can simply be screwed on.

Consumption and Print Time:

The material consumption ranges from 9 to 10 grams, depending on the slicer setting. The approximate printing time is between 25 to 40 minutes.

Notice:

Make sure that there are no filament burrs inside the adapter to avoid damaging the standard handle! Please use the lid handle carefully at first to make sure that the print is stable enough.

Comment & Rating (38)

@HairlessApe

Boosted

Really useful knob mod for push & pull motions for other mods, plus easy to print 👍

The designer has replied

@PhoneDesigner

You've interesting tweaks there. :O And the knob fits in well too. Thank you for sharing your make!

@tikkiweb

Boosted

Great design and implementation. The low profile glass riser I use allows enough clearance for the stock handle to fit under the AMS, which isn't ideal. Your design fixes that problem, also. It turns out your design fits the stock AMS handle, also. So, I printed two. Very clean and functional. Thank you.

(Edited)

The designer has replied

@PhoneDesigner

Thank you for the nice review! I'm really happy that you like it. May the knobs serve you well. :)

@Mati3D

Print Profile

0.16mm layer, 2 walls, 15% infill

Work great :)

@PhoneDesigner

Thank you. I'm glad you like it! :)

@chrismaddahl

Boosted

Thanky you for that awesome desgin, I like it very much. Would it be possible to create such a handle with the same design and function also for the glass door?

The designer has replied

@chrismaddahl

Boosted

I started to experiment a bit myself. I measured the door handle and realized it is exactly 45mm wide. So I upscaled your model to 150% and printed it. Fits perfectly. Only downside, it slides a few mm up and down because the flat bottom part has no "side guides". So that bottom part would need an update. The bigger handle part works unchanged, it just needs upscale to 150%

@PhoneDesigner

Replying to @chrismaddahl :

Hey Chris, I'm glad you like it! Wouldn't have thought it would fit through the front door so easily. ;-D But you're right. Maybe I should make a front knob for the sake of completeness.

@chrismaddahl

Boosted

Replying to @PhoneDesigner :

Das wäre super, sollte ja nicht so aufwendig sein. Ich war schon kurz davor in Tinkercad mit basteln anzufangen ;-)

@jaschazaehringe

I really like the design and the feel is equally great. I blacked out my P1S and this handle is perfect for that. I also like that it's open on the top. I often put a tiny season-appropriate figure or 3D printed model on top of the handle (like a Christmas tree, etc.) and will add a base for them that I can just click into this handle. Thanks for the model! (printed at 0.2 layer height, Matte-Black PLA, 0.4mm Nozzle)

@mettleh3d

a lid grip doesn't deserve photos this good

The designer has replied

@PhoneDesigner

It will be an exception. I won't put so much work into it again. :-D

@mettleh3d

Replying to @PhoneDesigner :

😂🫶

(Edited)

@user_3070966163

Excellent !!!!

The designer has replied

@PhoneDesigner

I'm glad you like it! :)

@Dyltone

Boosted

Printed 2, one in Black and the other in Gray. Used Bambu PETG-HF with .08 profile on a smooth plate. Excellent design. Can't decide between the two color options, so I have one on my printer and one on my AMS until one "speaks to me".

The designer has replied

@PhoneDesigner

Thank you for the kind review. I'm glad you like it! :)

@Ginga3d

Print Profile

0.16mm layer, 2 walls, 15% infill

A little bigger than expected but works great with the v4 riser I printed out of PETG. it makes lifting the glass out of the recess upper easy and solid feeling.