Quad Lock Desk Stand by Penner Fab

Penner Fab

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

0.16mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

4.8(23)

Open in Bambu Studio

Boost

111

287

433

251

Released

Description

Phone stand for QuadLock cases. Use the factory lock plate and screw it on. There are two versions of it now. The second is 130mm tall and has no outer ring to accommodate for the Mag Charger. https://makerworld.com/en/models/1160740-quad-lock-desk-stand-130mm-in-height#profileId-1166903

Comment & Rating (47)

@christian.drat

Print Profile

0.16mm layer, 2 walls, 15% infill

printed overall nice. In my case the quad lock adapter didn't fit on the print but it is secured with a screw.

@PennerFab

If you print it with the mounting surface facing up and use tree support, it should fit no problem and give you a little better quality on the walls

@indra.sukinata

could you me where can i find the stl or 3mf file for the black part?

@ChulioCZ

Print Profile

0.16mm layer, 2 walls, 15% infill

the holder has a nice design, the position when printing was strange but it worked.

@PennerFab

It is strange lol. but I did it to minimize support and maximize detail on the little interfacing notches and threads.

@Scoot4869

works well

@jason_rs

Print Profile

0.16mm layer, 2 walls, 15% infill

Dropped a star because there's a ring around the mount point that gets in the way of the mag mount fitting and it needed to be reworked and printed a second time. If you're not fitting a mag mount, this works fine without modifications for the standard clips.

@PennerFab

Thanks for the feedback, I will modify it.

@PennerFab

There are two versions of it now without the ring. One is the same 100mm tall, and the second is 130mm tall for larger phones.

@user_4149000754

Replying to @PennerFab :

Where has the second 130mm print profile without the ring gone? I can't see it.

@Truk

Could you make it available for A1 mini please? :)

The designer has replied

@PennerFab

You should be able to just change the printer in Bambu Studio

@Truk

Replying to @PennerFab :

what is the best print orientation for this?

@PennerFab

Replying to @Truk :

The best is to have the face you mount your quad lock attachment facing up. The threads and little indexing teeth will print much better this way and it should only take a little support at the bottom.

@Delboy1973

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Works great with standard quadlock mount. To fit a mag mount better i had to remove the collar around the splined area!

@PennerFab

Good to know! I never did try it with my mag mount. Maybe I'll make a revision for it.

@PennerFab

Replying to @PennerFab :

There are two versions of it now without the ring. One is the same 100mm tall, and the second is 130mm tall for larger phones.

@Delboy1973

Boosted

Replying to @PennerFab :

Noice, Thank you!

(Edited)

@95m3ltw

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

working well after 3 weeks of use

@PennerFab

Glad to hear it!

@user_3556635799

Boosted

I was able to screw in my Magnetic Head, but it could use a bit more infill at the mount point as the screw loosened due to weak support around it. Also should be a tad taller to allow straight power cables to be connected.

The designer has replied

@PennerFab

There is a taller version in the print profiles

@Delboy1973

Boosted

Perfect! Worked so well that I printed a second one for my workshop! 😊

@user_941686548

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Great item

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (47)

License

Related Models

RJ45 Ethernet Cable Lock

QUAD LOCK plate

Quad Lock Finger Ring "Key"

Bambu Spool Lock