Twist lock container

Rikskeff

Tools>Organizers

GIF

Print Profile(12)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

1.9 h

1 plate

4.9(67)

0.16mm layer, 2 walls, 15% infill

3.3 h

1 plate

5.0(9)

52MM HEIGHT x 34MM OD ~PLA~ 0.2mm layer, 2 walls, 15% infill

55 min

1 plate

4.4(8)

[Fast+Clean] 0.24mm layer, 2 walls, 15% gyroid infill

1.8 h

1 plate

4.8(4)

Click to see more

Open in Bambu Studio

Boost

1062

1870

160

297

3.6 k

2.6 k

Released

Description

Boost Me (for free)

Every boost is highly appreciated

Check out v2 with multiple dimensions

https://makerworld.com/en/models/661139#profileId-588401

EDIT : Some users reported issues with the lid being to loose. I have now updated the model to ensure a better fit.

Twist lock container to keep your items secure, perfect in your car, bathroom or when traveling.

The top screws and locks into place with a very satisfying click sound.

The model has tight tolerances and might be hard to turn the first couple of times. After a few times it will run smooth.

No supports needed.

Comment & Rating (160)

@wiggal

Boosted

super dose 👍👍👍👍

The designer has replied

@Rikskeff

love the top layer

@Quantum.Grower

Nice. How'd you do the top like that?

@swagdonalds

Replying to @Quantum.Grower :

Choose "Concentric" as bottom surface pattern. However the effect will only be visible on glossy / shiny filaments. The left one was printed with Matte PLA and it's not visible at all. The right one was printed with Silk PLA.

@cgreci

Petg-Cf, paused it to add a plexiglass window (top and botttom)

@josh.perez1112

:O what did you use? p or x series?! that is so nice!!!

@Clay2F

Print Profile

0.2mm layer, 2 walls, 10% infill

scaled 50% down and works perfect

@Rikskeff

Awesome, thanks for the post. Which print bed do you use?

@Clay2F

Replying to @Rikskeff :

IdeaFormer Doppelseitige PET+PEI... https://www.amazon.de/dp/B0CJ2H1BSJ?ref=ppx_pop_mob_ap_share this is my printplate

@Rikskeff

Replying to @Clay2F :

Thank you bud!

@NathanLeMarbe

Works great! I printed one normal PLA matte grey and one Silk PLA 20% larger.

The designer has replied

@Rikskeff

Looks great! Thanks for the post 😃

@josh.perez1112

that bigger one is so pretty!!! what filament was that?!?!?

@Bonbonmon75

What filament is the large one made from?

@Foppe1

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

very good

@Rikskeff

Which filament is it? I really like the color

@Foppe1

Boosted

It's the Bambu PLA basic gold!

@O2_j

Print Profile

[Fast+Clean] 0.24mm layer, 2 walls, 15% gyroid infill

nice and big, has grippy material on the side. printed on standard speed

@Weisnetde.

Thank you for your review!

@criss623

Print Profile

[Fast+Clean] 0.24mm layer, 2 walls, 15% gyroid infill

Printed perfect in PETG

@Weisnetde.

Nice color change 👍🏻 Thank you for your review!

@user_889441617

Print Profile

0.16mm layer, 2 walls, 15% infill

The profile is very consistent. I printed at %150 for the gold container.

@Rikskeff

Awesome, thanks for posting!

@Ondrak123k

Very nice box for electrical components and etc.

@darka

Print Profile

52MM HEIGHT x 34MM OD ~PLA~ 0.2mm layer, 2 walls, 15% infill

👌

@TheGooser

Boosted

thanks!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License