FIFA World Cup trophy

Copyright Claim

FIFA World Cup trophy

Boost
9
11
3

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 5% infill 49% Scale A1mini
0.2mm layer, 2 walls, 5% infill 49% Scale A1mini
3.2 h
1 plate
3.0(1)

Boost
9
11
3
2
30
8
Released

Description

Do not share on other sites this is intended to be downloaded from my profiles in Makerworld (https://makerworld.com/en/models/429622?from=search), Prusa Printable (https://www.printables.com/es/model/845312-fifa-world-cup-trophy-original-designer) and Thingiverse https://www.thingiverse.com/thing:5744650!

 

I have seen many users are stealing my work like nyx_nk in bambulabs who posted my design without my permission: https://makerworld.com/en/models/137513#profileId-149650


And this other ones in Prusa Printers: https://www.printables.com/es/model/390073-fifa-world-cup-trophie and https://www.printables.com/es/model/388544-fifa-world-cup-trophy-fixed and this one https://www.printables.com/es/model/375472-copa-del-mundo-seccionada-fifa-worl-cup


The FIFA World Cup Trophy, who does not want to have the biggest trophie from planet earth?

FYI: This model fits perfect on printer with Z axis of 40cm I used an Anet ET5 Pro 30x30x40cm, if you want to print on small printers like Ender 3 you need to use Prusa Slicer or Cura and cut the trophie in 2 parts with any of those two slicers.

The trophie is REAL size

UPDATE:

Fixed the I and F that may print incorrectly on some printers and they fall from the trophy.

Comment & Rating (3)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.2mm layer, 2 walls, 5% infill 49% Scale A1mini
Strength Issue:The model has a great quality of details, but the model broke in the thinner diameter point after falleing down from a table. I re-printed the model with the bambulab profile "0.2 strength", and 6 walls instead of 2 and now it looks a lot more solid.
The designer has replied
0
Reply
The trophy is not intended to be used as a throwing object (at least I hope not!). The profile focuses on saving materials and printing time for a display object. there are no strength issues in this regard, which is a preference of the majority of people. Obviously, more infill and walls would make it stronger, thicker, and hefter if this is the preference. You are giving a lower rating to a print profile for the wrong reasons but that's ok :) have a good one.
0
Reply
Don't you realize that nyx_nk posted the model before you did, and that you are falsely accusing them?
0
Reply
No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.