Model INFO:

Dimensions : 250mm x 179mm

You can scale the image, be sure to not change the Z height.

I've created a print profile so you have only to select your color in ams slot and you can hit print,

⚠️WARNING⚠️:

to insert the last color (white) I added a pause, you just need to manually change the color on the ams and resume printing

if you don't have ams or you don't have bambulab printer simply follow this instruction:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Lemon Yellow
At layer #16 (1.36mm) swap to Beige
At layer #21 (1.76mm) swap to White for the rest.

I hope you find this design enjoyable to print! Your feedback helps me improve designs even more. Feel free to share your thoughts below😊✨